Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Fort Lauderdale?
Metal roof installation in Fort Lauderdale typically costs between $15,000 and $40,000 for a standard single-family home, with most homeowners landing around $22,000 to $28,000 for a 1,800-square-foot roof using standing seam panels. The final number depends on the metal type, your roof’s pitch, and whether old roofing needs to be stripped first. Expect to pay roughly $8.50 to $16 per square foot installed, which puts metal on the higher end of roofing materials but with a lifespan that can double or triple asphalt shingles in South Florida’s climate.
Before you commit to metal, it’s worth understanding exactly where that money goes. Here’s the full breakdown.
Metal Roof Installation Cost Breakdown (2026)
| Cost Component | Typical Range (Fort Lauderdale) | Notes |
|---|---|---|
| Materials (panels, fasteners, flashing, underlayment) | $8,000 – $22,000 | Standing seam costs more than corrugated or ribbed panels. Stone-coated steel runs higher still. |
| Labor | $5,000 – $12,000 | Fort Lauderdale labor rates for metal roofing crews run $3 – $6 per square foot installed. |
| Old roof tear-off & disposal | $1,500 – $4,000 | Most Fort Lauderdale homes have existing asphalt shingles or tile that must come off first. Dump fees and hauling are included here. |
| Underlayment & insulation upgrades | $1,200 – $3,500 | High-temp peel-and-stick underlayment is code now in most of Broward County due to hurricane-season moisture. |
| Permits & inspections | $400 – $1,200 | Fort Lauderdale building department fees for reroofing. Your contractor should pull these. |
| Flashing, trim, ridge caps, valleys | $800 – $3,000 | Complex roofs with dormers, skylights, or multiple valleys cost more. Fort Lauderdale’s older neighborhoods like Sailboat Bend and Victoria Park have lots of these. |
Why Metal Costs What It Does in Fort Lauderdale
Metal roofing in Fort Lauderdale doesn’t follow national averages closely, and there’s a reason for that. The city sits in a High Velocity Hurricane Zone (HVHZ), which means every roofing system, metal included, has to meet Miami-Dade County product approval standards. That approval process filters out cheaper panels and lock systems that would fly off in a Cat 3 storm. What’s left are thicker gauge panels, stronger fasteners, and uplift-resistant clips, all of which cost more than what a roofer in Orlando or Tampa would quote for the same square footage.
Salt air is the second factor. Homes east of US-1 in neighborhoods like Rio Vista, Las Olas Isles, and Harbor Beach deal with constant salt spray that eats standard galvanized fasteners. Most of our metal installs in that corridor use stainless fasteners and aluminum or galvalume panels specifically rated for coastal exposure. That’s a $2,000 to $5,000 upgrade depending on roof size, but it’s the difference between a 40-year roof and one that shows rust blooms in six years.
What Affects Metal Roof Installation Pricing in Fort Lauderdale
- Metal type and panel profile. Exposed-fastener corrugated panels run the lowest, typically $15,000 to $22,000 for an average home. Standing seam, which hides fasteners and locks panels together, runs $22,000 to $35,000. Stone-coated steel, which mimics tile or shake and is popular in Fort Lauderdale’s historic districts, pushes $30,000 to $40,000.
- Roof pitch and complexity. A simple 5/12 gable roof in Croissant Park is fast to install. A steep 8/12 hip roof with multiple valleys in Victoria Park or Colee Hammock takes more labor hours, more safety equipment, and more flashing work. Complexity can add $3,000 to $8,000.
- Existing roof material. Stripping asphalt shingles is straightforward and cheap. Stripping concrete or clay tile, common in Fort Lauderdale’s older Mediterranean-style homes, adds labor and debris weight. Tile tear-off can add $2,000 to $5,000 versus shingle removal.
- HVHZ code upgrades. Fort Lauderdale enforces High Velocity Hurricane Zone requirements that affect panel gauge, clip spacing, and underlayment. A roof that passes code here costs about 15% to 25% more than an identical install in a non-HVHZ county. No way around it, and you shouldn’t want one.
- Access and site conditions. Tight lots in neighborhoods like Tarpon River or Riverside Park often mean hand-carrying panels, no room for a dumpster or material staging, and slower progress. Cranes or lift equipment for second-story roofs add cost too.
- Season and demand. Pricing tightens between May and November, hurricane prep season, when every roofer in Broward County is booked out. Winter and early spring quotes are often 5% to 10% better and scheduling is more flexible.
How to Save on Metal Roof Installation
Savings on a Fort Lauderdale metal roof come from timing, scope, and material selection, not from cutting corners on the install itself. Here’s where we see homeowners keep money in their pockets without creating problems down the road.
Get an early-season quote. If you can start your project between December and March, you’re outside the hurricane-prep rush. Roofing crews have better availability, material suppliers run occasional winter promotions, and you’re not competing with 40 neighbors who just got a red-tag on their roof inspection.
Bundle the tear-off. If you’re already doing a roof replacement, combining metal panel installation with new gutters, soffit, or fascia work at the same time typically costs less than doing those separately later. The crew is already on site, scaffolding is up, and the permit covers the same scope.
Choose the right panel profile for your budget. Standing seam is the premium choice and worth it for longevity and looks, but exposed-fastener galvalume panels are a legitimate, code-approved option that costs significantly less. If you’re in a non-coastal Fort Lauderdale neighborhood like Middle River Terrace or Progresso Village, and you don’t mind the industrial look, ribbed panels get you a metal roof for $15,000 to $20,000.
Don’t skip the underlayment upgrade to save a few hundred dollars. In Fort Lauderdale’s humidity, the underlayment is what keeps your roof deck dry when a hurricane peels the top layer. The cheap waterproofing fails first. This is the one “upgrade” that actually saves you money over the life of the roof.
We give a written price before any work starts, which means you’ll see exactly what your metal roof costs before you commit. Call (754) 354-7423 for a free estimate and we’ll walk you through the options and the numbers.
FAQs – Metal Roof Installation Cost
What’s the cheapest metal roof option in Fort Lauderdale?
An exposed-fastener corrugated or ribbed galvalume roof on a simple gable home starts around $15,000 in Fort Lauderdale. That assumes a roughly 1,500-square-foot roof with a basic pitch and no significant structural repairs. If your roof deck needs significant work or you’re in a coastal exposure zone requiring stainless fasteners, expect the starting number to land closer to $18,000. For an exact quote based on your roof, call (754) 354-7423 and we’ll put it in writing for free.
Is a metal roof worth the cost over asphalt shingles in Fort Lauderdale?
Metal costs roughly two to three times more than asphalt shingles upfront, but a properly installed metal roof in Fort Lauderdale can last 40 to 60 years where asphalt shingles typically fail in 12 to 18 years under South Florida sun and storms. Metal also reflects solar radiation better, which reduces attic heat gain, and stands up to hurricane-force winds better than all but the most premium shingle systems. If you plan to stay in the home more than ten years, the math works. If you’re selling soon, a new metal roof still adds resale value in this market. Homeowners who want the details can start with our metal roof installation guide for Fort Lauderdale.
Can I install a metal roof over existing shingles to save money?
In Fort Lauderdale, this is generally not allowed. Fort Lauderdale building codes limit reroofing to one existing layer of roofing, and if a second layer exists already, it must be stripped. Beyond code, layering metal over old shingles traps moisture in our climate and creates a failure point that voids most panel manufacturer warranties. The tear-off cost, typically $1,500 to $4,000, is money well spent. We would not recommend or install a metal roof over shingles in this market.
How long does metal roof installation take in Fort Lauderdale?
A straightforward metal roof install on a 1,800-square-foot home takes 3 to 7 working days, including tear-off, underlayment, panel installation, and trim work. Homes with complex roof geometry, steep pitches, or pending inspections can stretch the timeline to two weeks. Our crews coordinate with Fort Lauderdale building inspections as the work progresses so you’re not waiting a week to close out the permit.
Will my homeowner’s insurance give me a discount for a metal roof in Fort Lauderdale?
Many Florida insurers offer wind mitigation credits for metal roofing systems that meet HVHZ standards, and some offer additional premium reductions for impact-resistant metal. Credits vary widely by carrier but can cut your annual windstorm premium by 10% to 30%. Ask your agent specifically about wind mitigation inspection credits, and keep the product approval documentation from the manufacturer.
Why Sawyer Remodel Fort Lauderdale for Your Metal Roof
We started in 2005, and we’ve spent the years since then building a simple reputation: written prices, no surprises, and work that’s backed in writing. When we quote your metal roof, you get a line-item price before any work starts, not a ballpark that shifts when the invoice lands. That’s the way we work, and it’s been our standard from day one.
Luca Romano leads our Fort Lauderdale team, and every job runs under The Relay Visibility Guarantee: a live arrival time, photo updates before and after, and a written price before a single tool is picked up. Our technicians are background-checked and uniformed, so you know exactly who’s on your property. And if something isn’t done right on the roof, our 365-Day Done Right Promise means we make it right, in writing, for a full year after the project closes.
We work with name-brand roofing manufacturers including GAF, CertainTeed, and Owens Corning, so your metal roof and its components come from proven suppliers with manufacturer backing, not mystery materials from a supply yard.
Ready for a real number? Call (754) 354-7423 and we’ll schedule your free estimate. The written price is yours before you decide anything.
Pricing reflects the Fort Lauderdale market as of 2026. Sawyer Remodel Fort Lauderdale offers free estimates – call (754) 354-7423.
What Our Customers Say
"Crew cleaned up each day. Swept and wiped down the work area every evening, which I did not expect."
- Joy B."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K."Good renovation. The countertop slipped a week, but I got a text and a new date right away."
- Dina M.
