Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose KraftMaid Construction
We provide independent Kraftmaid in Fort Lauderdale construction, repair, and installation service, handling everything from cabinet refacing to full kitchen teardowns and bathroom vanity installs. What makes our KraftMaid work different is two decades of watching how these cabinets actually behave in salt air and 90% humidity, where thermofoil doors bubble and MDF hinge bores crumble if you don’t address the root cause. We’re not authorized by KraftMaid, and that’s the point: you pay for honest diagnostics and real fixes, not manufacturer-authorization overhead. Call (754) 354-7423 for a free estimate.
Why Trust Sawyer Remodel Fort Lauderdale for Your KraftMaid Construction?
KraftMaid cabinetry has its own quirks. Most crews learn them the hard way. Ours learned them on the job in Fort Lauderdale condos and single-family homes, pulling apart Vantage base cabinets whose doors had delaminated from years of A/C condensation and coastal humidity, and we also handle Kraftmaid repair in Plantation. We know which hinges pull out of MDF, which drawer glides seize up in salt air, and which thermofoil finishes hold up better than others in a bathroom that steams twice a day.
Luca Romano, our owner and lead contractor, trained at Los Angeles Trade-Technical College reading structural plans before he ever touched a cabinet job, and he’s spent the past several years running KraftMaid installs and repairs in Fort Lauderdale homes, including some tight 1990s builds near Las Olas Boulevard where the original cabinets had settled and racked. That background means we diagnose the cabinet the way a builder would, not the way a parts-swapper would. Every KraftMaid job gets a written price before work starts, background-checked technicians in uniform, and photo updates. The work either holds up or it doesn’t – we make sure it does.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Fort Lauderdale
- Thermofoil door delamination on Vantage and Venicia lines. Fort Lauderdale’s humidity works its way between the thermofoil skin and the MDF core, especially on doors near dishwashers, ranges, and steamy bathrooms. We see bubbling and peeling most often on Vantage base doors in older condos where the A/C runs hard and moisture never fully evacuates. Once the film separates, the door needs refacing or replacement – gluing it back rarely holds.
- Sagging adjustable shelves in Momentum and Kemeron wall cabinets. The original shelf clips on these lines are light-gauge plastic that creep under load, especially when someone stacks dinner plates. A shelf that sags 3/8 inch in the middle will eventually drop entirely. We replace the clips with heavier-duty steel pins and re-pin the shelf bores, which takes about twenty minutes per cabinet.
- Finish chipping around sink base cabinets. This is the classic water-exposure failure. The cutout around the sink gets nicked during installation, water sits in the raw edge, and the finish lifts in sheets within a year or two. We sand back, fill, and re-coat with a catalyzed finish, and we re-caulk the sink rim so it doesn’t happen again.
- Hinge screw pull-out on MDF doors. KraftMaid’s frameless lines use MDF door cores. When a hinge screw strips or the door gets pulled hard, the MDF crumbles around the bore and the hinge works loose. We fill and redrill the bores, then set stainless steel or zinc hinges with a longer thread bite. On doors that have failed twice, we’ll recommend upgraded soft-close hinges from a salt-air-tolerant brand rather than reinstalling the same hardware.
- Drawer glide failures in high-use base cabinets. The side-mount glides KraftMaid ships on entry-level lines are fine for average use, but a stacked pots-and-pans drawer near the range sees more cycles than anything else in the kitchen. In Fort Lauderdale’s moisture, the nylon rollers swell and bind. We swap in full-extension ball-bearing glides, which is usually a quick in-place job.
KraftMaid Parts & Our Repair-vs-Replace Approach
When a KraftMaid cabinet needs new hardware or drawer glides, we use OEM or manufacturer-equivalent parts when they’re the right call. But we don’t default to OEM out of habit. For hinges and soft-close mechanisms in Fort Lauderdale’s salt air, we often recommend an upgrade to Blum or similar aftermarket hardware with better corrosion resistance than the factory spec. For drawer glides, a quality full-extension replacement usually outperforms the original at a similar price.
The harder call is cabinet boxes. If a sink base has swollen from water and the particleboard or MDF has lost its structure, we say so plainly. Chasing recurring issues with patches and repairs costs more over two years than one partial replacement done right. We stock common KraftMaid hinge types, glide lengths, shelf pins, and touch-up kits locally, which keeps most repair callbacks off the schedule. Call (754) 354-7423 and we’ll walk through what your cabinet actually needs.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet, door, or hardware in place and tell you what failed and why. On KraftMaid thermofoil, we check for moisture intrusion behind the film and test the integrity of hinge bores and shelf supports before quoting anything.
- 2
Written quote. The price lands in your hands before any work starts. Line items, part numbers where relevant, and labor separated. No change orders unless you add scope.
- 3
Repair or install. We fill and redrill hinge bores, swap glides and hinges, reface doors, or install full cabinet runs. KraftMaid frameless and face-frame cabinets require different hang and alignment methods, and we set doors square the first time so they stay that way.
- 4
Test and align. Every drawer gets cycled, every door gets checked for reveal and closure, and soft-close mechanisms get adjusted under real use. We don’t call it done until we’d accept it in our own kitchen.
- 5
Written warranty. Every KraftMaid repair and install carries our 365-Day Done Right Promise. If it’s not done right, we make it right, backed in writing.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Fort Lauderdale
We work on the full KraftMaid range: Vantage and Venicia thermofoil lines, Momentum and Kemeron wood and laminate series, plus older discontinued KraftMaid lines still common in Fort Lauderdale homes from the 1990s and early 2000s, and we serve as a General Contractor for related projects. That includes wall cabinets, base cabinets, sink bases, pantry cabinets, vanities, and islands. For new installs, we handle the full scope: box assembly, hanging, leveling, trim and crown, hardware, and countertop coordination with Cambria, Silestone, or Caesarstone surfaces.
We Also Service These Brands
We’re not locked into one manufacturer. Alongside KraftMaid, we install and repair work that pairs Cambria and Silestone countertops, Kohler and Toto fixtures, and other major brands. When a kitchen or bath mixes brands, we handle it without making you call three separate crews.
FAQs – KraftMaid Construction Service in Fort Lauderdale
No. We’re an independent KraftMaid service provider, which means you’re not paying for a badge or a manufacturer-mandated markup. We source OEM and equivalent parts and follow installation methods that respect KraftMaid’s quality standards, but we work for you, not the factory.
OEM or manufacturer-equivalent parts are our default for anything structural, like cabinet boxes, doors, and drawer fronts. For hinges, soft-close mechanisms, and glides, we’ll quote OEM when it’s the better choice, and aftermarket upgrades when they’ll outlast the factory hardware in Fort Lauderdale’s salt air.
Most hinge replacements, glide swaps, and shelf repairs happen in one visit under two hours. Refacing a kitchen runs three to five days depending on door count. Full cabinet installation lands in the one-to-two-week range per room. We always give you the timeline in writing with the quote.
We service Vantage, Venicia, Momentum, and Kemeron series, plus older discontinued KraftMaid lines common in Fort Lauderdale homes built in the 1990s and 2000s, and we offer KraftMaid Construction in Lauderdale-by-the-Sea, FL. If you’re not sure which line you have, send us a photo of the hinge and the door edge – we can usually identify it in one look.
For repairs on cabinets still under KraftMaid’s limited warranty, we recommend contacting KraftMaid first for any manufacturing-defect claim. Our repair work won’t void warranty coverage for unrelated components, and we’ll help you navigate what the factory will and won’t cover. For cabinets past warranty, none of this applies and we just fix what’s broken.
Bubbling thermofoil doors are almost always a moisture problem. Fort Lauderdale’s year-round humidity, combined with A/C condensation swings, works its way between the thermofoil sheet and the MDF door core. Once the adhesive bond breaks, air pockets form and the film lifts. The fix is door refacing or replacement with proper sealing on the replacement, not regluing the old film.
Yes, to a point. Cognac and Muslin are older KraftMaid stain finishes, and we match them through a local finishing partner who can tint to a close visual match. Understand that an exact match to a 15-year-old finish is extremely difficult because the original has aged and UV-shifted. For most refacing jobs, we match the tone close enough that the eye doesn’t catch it, and we’ll tell you honestly if a full run makes more sense than a partial.
We repair them when the shelf itself is intact. Sagging is usually a clip failure, not a shelf failure. We replace the original plastic clips with steel or reinforced pins and check the bores. If the shelf has actually warped, replacement is the only option. Call (754) 354-7423 and we can tell you what yours needs from a photo.
Rarely all of them. In a Fort Lauderdale bathroom, most soft-close hinge failures are corrosion-related, and only the hinges on the most-used doors tend to go first. We replace the failed units and can quote upgrading the rest to corrosion-resistant hardware while we’re there. If the door hinge bores are crumbling, that’s a different fix: fill, redrill, and re-set the hinge with proper torque.
We inspect the box first. If the side panels and face frame are sound, we cut out the swelled bottom panel and replace it with a marine-grade or moisture-resistant panel, then re-caulk the sink rim and re-route the supply lines so future drips don’t pool. If the whole box has lost structural integrity, we’ll tell you straight: partial replacement is usually the honest option. Call (754) 354-7423 for an exact quote – estimates are free.
Cabinet installation runs $4,000 to $13,000 depending on scope, refacing runs $200 to $750 per linear foot, and bathroom vanity installation typically lands between $800 and $3,000. Kitchen island installs run $3,000 to $10,000, and backsplash work runs $800 to $2,500. These ranges reflect actual Fort Lauderdale market work; your exact quote is free and based on what we measure on site.
| KraftMaid Service | Typical Fort Lauderdale Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing (per linear foot) | $200 – $750 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
Book Your KraftMaid Service in Fort Lauderdale, FL
From a single hinge fix to a full kitchen of new KraftMaid cabinets, the next step is the same. Call (754) 354-7423, get a real person on the line, and schedule your free estimate. Written price before work starts, photo updates throughout, and a full year of accountability after the job closes.
Written by Luca Romano, Owner at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
