Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Therma-Tru Construction
We’re an independent Therma Tru in Fort Lauderdale service provider, and our crew handles everything from Classic-Craft entry door hinge adjustments to full impact-rated patio door replacements. We do not have manufacturer authorization from Therma-Tru, and we won’t pretend otherwise. What we do have is 20-plus years of hands-on field time with the full Therma-Tru product line across hundreds of coastal homes, which means we know exactly how these doors fail in this climate and what it takes to fix them right. Need Therma-Tru work done in Fort Lauderdale? Call (754) 354-7423 for a free estimate.
Fort Lauderdale treats exterior doors like a test chamber. Salt air, hurricane wind codes, and months of heavy rain will find every weak seal, every misaligned strike plate, every worn sweep. We service Therma Tru repair in Plantation, Lauderdale Manors, Las Olas Isles, Sailboat Bend, and the beachfront condos along A1A. The work either holds up or it doesn’t – we make sure it does.
Why Trust Sawyer Remodel Fort Lauderdale for Your Therma-Tru Construction?
We work on Therma-Tru products because Fort Lauderdale homeowners keep buying them, and they keep needing service when the climate does what the climate does. Luca Romano, our owner and lead contractor, has spent years pulling Therma-Tru slabs off settled concrete-block ranches and waterfront estates alike. He knows the Classic-Craft line’s multi-point lock geometry, the Smooth-Star skin profile, and how the Pulse Series patio doors respond to thermal cycling in direct sun. We’re not Therma-Tru authorized, and we don’t need to be. We’re the crew that fixes what the warranty department can’t see from a call center.
Every Therma-Tru job we take gets the same treatment as any General Contractor project: a written price before we start, live arrival tracking, before-and-after photo updates, and the 365-Day Done Right Promise in writing. If a door we service doesn’t hold up within a year, we come back. That’s the Relay Standard, and it applies to a $200 hinge adjustment the same as a full impact-rated installation.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Fort Lauderdale
Here’s what we see most often on Therma-Tru doors in Fort Lauderdale, and what’s actually causing it:
- Salt-air delamination on Classic-Craft fiberglass entry doors. The bottom rail absorbs moisture through a compromised threshold seal, the salt in the air accelerates the breakdown, and the fiberglass skin starts to separate from the core. In homes within a mile of the Intracoastal, we see this constantly. The fix is rarely a new slab – it’s typically a composite threshold replacement, new Therma-Tru weatherstripping, and resealing the bottom rail before the delamination spreads.
- Failed multi-point locking hardware on Classic-Craft doors. Fort Lauderdale’s older homes sit on slabs that shift. When the slab settles even a quarter inch, the strike plate drifts, the multi-point lock misaligns, and the homeowner ends up forcing the handle until the internal mechanism strips. We rehang the slab, realign the strike, and replace the lock body with genuine Therma-Tru hardware when it’s beyond adjustment.
- Cracked or fogged glass lites in Pulse Series patio doors. Hurricane-driven debris cracks them. Thermal stress from Fort Lauderdale’s afternoon sun fogs them. Either way, the insulated glass unit is shot. We replace lites with impact-rated aftermarket equivalents when the homeowner wants to save money without losing protection, or match factory specs if they want exact OEM.
- Warped door bottoms on Benchmark Builder Series entry doors. Fort Lauderdale’s rainy season dumps standing water on concrete stoops. The Benchmark line is built to a price point, and the bottom rail is the first casualty. If the warp is minor, we can sometimes correct it with a new sweep and threshold. If the bottom rail is swollen enough that the door won’t latch, it’s replacement time.
- Sticking and binding on Smooth-Star doors in high-humidity zones. Smooth-Star fiberglass doors are less porous than wood, but the frame is still wood, and Fort Lauderdale’s humidity swells it. We trim, reseal, and rehang, then adjust the hinges so the door swings clean through the full arc.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use genuine Therma-Tru weatherstripping, door sweeps, and hardware when replacement is needed. The fit matters. Aftermarket sweeps from big-box stores rarely match the OEM profile, and a door that doesn’t seal against a Fort Lauderdale afternoon downpour is a door that fails early. For glass lites and thresholds, we often spec marine-grade or impact-rated aftermarket equivalents. That typically saves homeowners 20-40% off OEM pricing without giving up durability in this climate.
When a door slab is too far gone – delamination past the bottom rail, a cracked skin, a frame that’s been swollen and shimmed too many times – we say so. Repeated patching on a door that faces direct ocean wind is false economy. We’ll recommend full replacement, and we’ll tell you whether an impact-rated slab is worth the upgrade for your specific exposure. Call (754) 354-7423 if you want an honest take on repair versus replace.
Our Therma-Tru Service Process – Step by Step
This is how every Therma-Tru job runs with Sawyer Remodel Fort Lauderdale:
- 1
Diagnosis. We inspect the full door assembly – slab, frame, threshold, hinges, multi-point lock, weatherstripping, and glass lites. We check for slab settlement, salt-air corrosion on hardware, and hidden moisture intrusion around the rough opening. We tell you what we found in plain language and give you a written price before any work starts.
- 2
Repair or install. We use OEM Therma-Tru parts where it matters and proven aftermarket equivalents where it saves money without risk. For impact-rated patio door installations in Fort Lauderdale, we follow Miami-Dade County product approval requirements and pull permits when required.
- 3
Test. We cycle the door through its full range, lock and unlock the multi-point system, check the seal at the bottom sweep and all four sides of the reveal, and spray-test when needed. A Therma-Tru door in Fort Lauderdale has to close crisp and seal tight.
- 4
Warranty. Every repair and install carries our 365-Day Done Right Promise in writing. If something we did doesn’t hold up within a year, we come back and make it right. No argument, no chasing.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Fort Lauderdale
We work on the full Therma-Tru line. Classic-Craft fiberglass entry doors are the most common calls we get, usually for hinge issues, multi-point lock failures, or salt-air delamination. Smooth-Star entry doors come in for frame swelling and weatherstripping replacement in the humid months. Pulse Series patio doors show up with pitted tracks from salt air and glass lites that need impact-rated replacement. Benchmark Builder Series doors are the entry-level line we service most often in Fort Lauderdale’s older neighborhoods, where the concrete stoops hold water every rainy season. We keep common Therma-Tru weatherstripping profiles, sweeps, and lock bodies in local stock for faster turnaround.
We Also Service These Brands
Therma-Tru doors are one part of what we do in Therma-Tru Construction in Lauderdale-by-the-Sea, FL and surrounding areas. We also install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across kitchen and bathroom remodels. If your Therma-Tru door project is part of a larger renovation, we can run the whole thing under one written price.
FAQs – Therma-Tru Construction Service in Fort Lauderdale
It depends on the slab condition and the existing frame. If the fiberglass skin is intact and the frame is solid, we can reinforce the door with impact-rated glass lites, upgrade the multi-point lock, and install heavy-duty hinges rated for wind load. If the slab has delaminated or the frame has rotted from salt-air moisture, retrofitting is throwing good money after bad. Call (754) 354-7423 and we’ll tell you which situation you’re in.
The bottom rail has absorbed moisture. In Fort Lauderdale, that moisture is salt-laden, which accelerates delamination. The swelling pushes the slab out of alignment, so the latch misses the strike plate. Once it starts, it doesn’t reverse on its own. The fix is a new composite threshold, fresh Therma-Tru weatherstripping, and resealing the bottom rail before the delamination spreads to the visible face. Call (754) 354-7423 for a free estimate.
We keep common Therma-Tru weatherstripping profiles, door sweeps, and multi-point lock bodies in local Fort Lauderdale stock. Glass lites for Pulse Series patio doors are typically ordered per spec, but we can usually source impact-rated equivalents within a few days. No weeks-long factory waits unless you specifically want exact OEM glass.
Pitted tracks are a salt-air problem we see all over Fort Lauderdale. If the pitting is surface-level, we can clean and reseal the track and replace the rollers with marine-grade hardware. If the track is deeply corroded or the frame itself has started to rot, replacement is the honest call. Get us a photo or call (754) 354-7423 and we’ll give you a straight answer.
We treat every ocean-facing install as a wind-mitigation job. That means impact-rated glass lites, reinforced frames, multi-point locks that engage fully, and thresholds sealed against driving rain. We follow Miami-Dade County product approval requirements and pull permits when the scope calls for it. A door that faces direct ocean wind in Fort Lauderdale can’t be installed like a door in a subdivision thirty miles inland.
Most Therma-Tru repairs run $200 to $600 for hinge adjustments, weatherstripping, and lock realignment. A full Classic-Craft slab replacement runs $1,800 to $5,500 depending on glass and hardware. Impact-rated Therma-Tru patio door installation runs $8,000 to $25,000 depending on size and exposure. Here’s the breakdown:
| Service | Price Range |
|---|---|
| Therma-Tru entry door hinge adjustment & sealing | $200 – $600 |
| Therma-Tru door slab replacement (Classic-Craft) | $1,800 – $5,500 |
| Impact-rated Therma-Tru patio door installation | $8,000 – $25,000 |
Call (754) 354-7423 for an exact quote on your Therma-Tru project. Estimates are free, and the price we quote is the price you’ll see on the invoice.
Book Your Therma-Tru Service in Fort Lauderdale, FL
If your Therma-Tru door is sticking, leaking, or refusing to latch, call Sawyer Remodel Fort Lauderdale at (754) 354-7423. We’ll schedule a diagnosis, give you a written price before any work begins, and fix it right the first time. The work either holds up or it doesn’t – we make sure it does.
Written by Luca Romano, Owner at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
