Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Belgard Construction
We’re Sawyer Remodel Fort Lauderdale, and we handle independent Belgard construction service across Fort Lauderdale, from paver driveway rebuilds in Rio Vista to pool deck repairs in Coral Ridge. We are not a Belgard dealer or authorized affiliate. We’re a local general contractor that has spent years working on Belgard paver, wall, and paving stone systems, and we know the specific ways these products fail in South Florida’s salt air, sandy subgrades, and hurricane-driven rain cycles. Call (754) 354-7423 if you have a Belgard paver driveway that’s settled, a retaining wall that’s cracking, or joints that have washed out. We’ll give you a straight answer on what it takes to fix it.
What separates our Belgard work from a generic paver crew is depth. We’ve pulled apart failing Belgard in Fort Lauderdale neighborhoods from Victoria Park to Imperial Point, and we can usually tell you within ten minutes of looking whether the problem is the base, the edge restraint, the drainage, or the paver itself. That diagnosis drives everything: the fix, the price, and whether we repair or rebuild.
Luca Romano, our owner and lead contractor, learned to read structural problems before he could legally frame a wall. He trained at Los Angeles Trade-Technical College and spent his early years gutting and rebuilding homes in East LA. For the past several years, he and our crew have taken on full kitchen teardowns and bathroom overhauls across Fort Lauderdale, including tight older builds near Las Olas Boulevard where nothing is square and nothing is a template job. When it comes to Belgard systems, the same rule applies: the work either holds up or it doesn’t. We make sure it does.
Why Trust Sawyer Remodel Fort Lauderdale for Your Belgard Construction?
Belgard makes a wide range of interlocking concrete pavers, segmental retaining wall blocks, and outdoor living products. The product catalog is huge. The failure modes, on the other hand, are predictable, and we’ve seen most of them. The crew that shows up at your door is the same crew that has rebuilt Belgard Dublin Cobble driveways that sank into sandy subgrades, reset Belgard Catalina patios that were stained from irrigation overspray, and replaced Belgard Weston Wall blocks that cracked because the backfill behind them never drained properly.
We carry commercial-grade polymeric sand, geotextile fabric, crushed concrete base, and aluminum or plastic edge restraints that meet or exceed Belgard’s installation specifications. We stock those locally, which means less waiting when a paver job is mid-stream. When a repair calls for genuine Belgard product, we source it directly through regional distributors. Luca Romano oversees every Belgard job we take. That’s not a tagline. It means the person who priced the job is the person checking the compaction, the slope, and the joint sand before we call it done.
Every project runs under The Relay Visibility Guarantee: a written price before work starts, live arrival time tracking, and before-and-after photo updates. You’ll know who’s coming, when they arrive, and what it costs, before a single tool is picked up. We don’t do voicemail loops. A live person answers the phone, 24/7.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Fort Lauderdale
Belgard pavers are well made. The failures we see in Fort Lauderdale are almost always installation and drainage failures, not manufacturing defects. Here’s what actually shows up:
- Settling and heaving of Belgard Dublin Cobble driveways. Dublin Cobble is a tumbled, old-world style paver that looks great on driveways. In Fort Lauderdale’s sandy soil, though, a driveway built without proper excavation, compaction, and edge restraint will start sinking within a year or two. The classic sign is a lip forming at the garage apron or a low spot at the street end where the base eroded into the road subgrade. We pull the affected area, excavate to a proper depth, compact a crushed concrete base in lifts, and re-lay the pavers with the right edge restraint so they can’t migrate.
- Sand joint erosion between Belgard Mega-Arbel pavers. Mega-Arbel is a larger-format paver that carries heavy loads, but the joints still rely on sand to lock the surface together. Heavy summer rain and aggressive pressure washing strip standard joint sand fast. We re-sand with high-performance polymeric sand and educate homeowners on the right way to clean paver surfaces without blasting the joints out.
- Cracking of Belgard Weston Wall blocks. Weston Wall is a pinned segmental retaining wall system. When the blocks crack, the usual cause is water. South Florida downpours saturate the soil behind the wall, hydrostatic pressure builds, and if there’s no gravel backfill column and no weep drain, the wall takes the force. We rebuild the affected section with proper drainage behind it, not just face it with new block.
- Efflorescence and surface staining on Belgard Catalina pavers. Catalina is a clean, contemporary paver with a larger surface area, which makes white mineral deposits and pool chemical staining very visible. Efflorescence comes from moisture wicking through the paver and leaving salts on the surface. Fort Lauderdale’s hard water and irrigation overspray make it worse. We clean with appropriate efflorescence removers and, where needed, seal the surface after correcting the moisture source.
- Paver base washout from stormwater flow. Fort Lauderdale’s flat terrain and hard downpours send water across paver surfaces at high volume. If a paver patio or walkway doesn’t have a slight slope and a clear drainage path, the base material erodes at the edges and the pavers lose support. We re-level and rebuild with proper cross-slope and drainage so the water goes where it’s supposed to, not under the pavers.
Belgard Parts & Our Repair-vs-Replace Approach
When a Belgard surface needs new pavers to match existing ones, we source genuine Belgard product. Color-matching across lots is real, especially with tumbled lines like Dublin Cobble. We’d rather get the actual product than gamble on a lookalike that’s slightly off in hue and texture. For joint sand, base material, geotextile fabric, and edge restraints, we use high-quality commercial alternatives that meet or exceed Belgard’s installation specs. The manufacturer’s warranty covers manufacturing defects, not base failure. A paver that cracked because the base settled is an installation problem, not a Belgard problem, and the fix starts below the paver.
We recommend repair and re-leveling only when the existing pavers are structurally intact. If the pavers themselves are cracked or the base has failed across a wide area, a partial fix is a band-aid. In South Florida’s soil conditions, a full base rebuild is often the honest answer, and it’s the one that lasts. Call (754) 354-7423 and we’ll tell you which path fits your situation.
Our Belgard Service Process – Step by Step
- 1
Diagnosis and site inspection. We walk the area, check for low spots, measure slope, probe the base where possible, and look at drainage flow paths. For Belgard systems specifically, we check whether edge restraints are intact, whether the base has washed out, and whether the failure pattern points to installation, water, or product.
- 2
Written line-item estimate. You get a price in writing before any work starts. That number is the number you approve. No change orders because we misread the scope.
- 3
Repair or rebuild. We excavate to the right depth, haul in proper base material, compact in lifts, set edge restraints, re-lay the pavers, and re-sand the joints with polymeric sand. For wall work, we address drainage behind the wall before we set a single block.
- 4
Test and verify. We check slopes with a level, flood-test drainage where it matters, and walk the whole surface. Luca reviews the work before we call it done.
- 5
365-Day Done Right Promise. If it’s not done right, we make it right, backed in writing for a full year after the project closes.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Fort Lauderdale
We work on Belgard Catalina Paver Series, Dublin Cobble Pavers, Mega-Arbel Paver Systems, and Weston Wall Block installations. That covers driveways, pool decks, walkways, patios, and segmental retaining walls across Fort Lauderdale. We also install new Belgard paver surfaces, not just Belgard repair in Plantation and surrounding areas. Our sister service lines include paver patio installation, paver driveway installation, and tile and flooring work, which means your outdoor Belgard project and the indoor tile that connects to it can run under one crew and one schedule.
We Also Service These Brands
We’re not a single-brand shop. In the same week, our crews might reset a Belgard paver patio and reface a kitchen with KraftMaid cabinetry, Cambria quartz countertops, a Silestone island, and Kohler fixtures. If your project spans the outdoor paver surface and the indoor finishes, one point of contact beats three.
FAQs – Belgard Construction Service in Fort Lauderdale
The most common cause is base failure at the transition between your property and the public right-of-way. Fort Lauderdale’s sandy subgrade erodes quickly when water runs along the driveway edge during heavy rain. If the edge restraint wasn’t installed properly at the street end, the base washes out and the pavers sink. The fix is excavation, a compacted crushed concrete base, and a proper edge restraint at that transition. Call (754) 354-7423 for an inspection and an exact price with no change orders.
Yes. We source genuine Belgard Catalina pavers and pull from the same color lot where possible. Color drift between production lots is real, especially with concrete pavers exposed to Florida sun for a few years. We’ll blend new and existing pavers across the surface so the transition is not visible, rather than setting a hard line where new meets old. Estimates are free.
We use a crushed concrete base compacted in lifts over geotextile fabric, with the full depth set to handle vehicle loads and South Florida’s sandy, shifting subgrade. It exceeds Belgard’s minimum installation specs and specifically addresses the base washout problem that plagues paver driveways near the Intracoastal and in Belgard Construction in Lauderdale-by-the-Sea, FL and other low-lying neighborhoods.
Hairline cracks in Weston Wall blocks almost always point to water pressure behind the wall, not a defective block. We remove the affected section, install a gravel drainage column and weep drain, repair the backfill, and replace the cracked blocks with matching product. If the wall section is structurally compromised, we’ll tell you that too. The honest fix addresses the water. Call (754) 354-7423 and we’ll walk you through what we’re seeing.
We do. Our 365-Day Done Right Promise covers every Belgard repair and installation we complete, in writing, for a full year. If it’s not done right, we make it right. Separately, we’re independent of Belgard, so we’re not tied to any one product’s warranty terms. The construction warranty is ours, and it follows the project.
Here are our current price ranges for the Belgard work we do most often in Fort Lauderdale:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7000 – $18000 |
| Paver Patio Installation | $3500 – $11000 |
| Countertop Installation | $2000 – $6500 |
Every job gets a written line-item estimate before work starts. Call (754) 354-7423 for an exact number on your project.
Book Your Belgard Service in Fort Lauderdale, FL
If your Belgard pavers are settling, cracking, or washing out, don’t wait through another hurricane season. Call (754) 354-7423 for a free estimate. Luca Romano and our Fort Lauderdale crew will walk the job, give you a written price, and tell you straight what it takes to fix it right.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
