Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Tremron Construction
We’re an independent Tremron in Fort Lauderdale service provider, which means we repair and install Tremron pavers, retaining walls, and hardscape features without being tied to the manufacturer’s sales arm. Our crews work on Tremron projects every week across Fort Lauderdale, fixing storm-damaged driveways, settling patios, and failed retaining walls that other contractors won’t touch. The difference is simple: we know how these products actually behave in South Florida’s salt air and sandy soil, not just how they look in a catalog. Call (754) 354-7423 to get a written price before any work starts.
Tremron is the dominant paver brand in Florida for a reason. Their concrete pavers hold up better than most in subtropical conditions, but nothing survives Fort Lauderdale’s combination of afternoon downpours, hurricane storm surge, and relentless UV without proper installation and maintenance. We’ve rebuilt enough Tremron jobs to know exactly where the weak points are – and how to fix them so they stay fixed. We’re not a Tremron dealer or authorized agent. We’re a General Contractor that happens to know this brand inside out because we’ve been pulling it apart and putting it back together for years.
Why Trust Sawyer Remodel Fort Lauderdale for Your Tremron Construction?
Most contractors in Fort Lauderdale will install whatever paver you point at. We actually understand the product. Tremron’s Mega-Arbel line, for example, has a specific interlock pattern that fails predictably when the base isn’t compacted to the right density. The Olde Towne Cobble series uses a tumbled finish that hides minor chipping but shows efflorescence more visibly than their smoother lines. These aren’t details you get from a brochure. They’re details you get from fixing the same problems on real Fort Lauderdale driveways and patios month after month.
Luca Romano, our owner and lead contractor, learned structural work the hard way – reading plans at Los Angeles Trade-Technical College and swinging a framing nail gun before he had a driver’s license. That background matters when a Tremron paver job hides a surprise underneath. A patio that’s sinking in one corner usually isn’t a paver problem. It’s a base compaction problem or a drainage problem disguised as a paver problem. We diagnose the real cause before we touch a single unit. Every job runs under The Relay Visibility Guarantee: a written price before work starts, live arrival time tracking, and before-and-after photo updates. And our 365-Day Done Right Promise covers every Tremron repair we make for a full year – if it’s not done right, we make it right.
Styles & brands we work with
Common Tremron Construction Problems We Fix in Fort Lauderdale
- Efflorescence and color fading on older Tremron pavers. That white, chalky film on your pavers isn’t mold – it’s mineral salts leaching out of the concrete. It’s especially common within a mile of the Intracoastal, where salt air accelerates the process. Tremron’s Stonehurst and Estate Stone lines tend to show it faster because their color blends are lighter. We clean the surface, address the moisture source if there is one, and apply a penetrating sealer rated for South Florida conditions. Skipping the sealer means the white comes back within a season.
- Edge spalling and corner chipping from paver shifting. When water gets under Tremron pavers and the base softens, the units start moving against each other under vehicle weight or foot traffic. The edges chip first. Mega-Arbel units with their distinct rectangular profile are particularly prone to visible corner damage once the interlock breaks. We pull the affected units, fix the underlying base issue, and replace the damaged pavers from the same Tremron line when it’s still in production.
- Settling and uneven surfaces from improper base compaction. Fort Lauderdale’s sandy soils move. A paver driveway or patio installed over a poorly compacted base will settle within two to three years, creating low spots that collect water and eventually breed more problems. We see this constantly on older homes in Lauderdale Manors where the original hardscape went in fast and cheap. The fix is removing the affected area, excavating to the correct depth, recompacting in lifts, and reinstalling the pavers on a stable base – not just adding sand on top and calling it done.
- Joint sand washout between Tremron pavers. Florida’s summer rains are brutal on paver joints. Regular sand washes out, weeds take root, and the pavers start shifting without lateral support. The permanent fix is polymeric sand – it binds together when wet and stays put. But you can’t just sweep it into joints that have already failed. The joint depth has to be right, the pavers have to be dry, and the sand has to be activated properly or it’ll haze over the surface. We’ve refinished hundreds of Fort Lauderdale paver surfaces this way.
- Retaining wall block failure on Tremron wall systems. When a retaining wall starts leaning or the blocks separate, it’s rarely the block itself that failed. It’s usually water pressure building up behind the wall because drainage wasn’t installed correctly, or the wall wasn’t engineered for the soil load. We rebuild Tremron walls with proper gravel backfill, drainage pipe, and geogrid reinforcement where the height demands it. The wall blocks are fine. The original installation usually wasn’t.
Tremron Parts & Our Repair-vs-Replace Approach
For Tremron repairs, we always try to match the original product first. If your patio is Mega-Arbel in a specific color blend, we source replacement units from the same Tremron line when it’s still being produced. If the line has been discontinued – and Tremron does rotate product lines over time – we source aftermarket pavers with the same dimensions, thickness, and color blend. We’ll tell you up front if there’s going to be a color mismatch. Different production runs and different manufacturers never match perfectly, even when the spec sheet says they should. You deserve to know that before we install, not after.
Repair versus replace comes down to the base. If individual pavers are cracked, chipped, or stained but the base underneath is stable, repairing those units is the right call. If the base has failed – and in Fort Lauderdale, sandy soil and poor drainage mean it often has – replacing a few pavers is just a temporary fix. We’ll tell you which situation you’re in, and we’ll give you a written price for either path before you commit. Call (754) 354-7423 for an honest assessment.
Our Tremron Service Process – Step by Step
- 1
Diagnosis. We inspect the affected paver or wall area, check for drainage issues, test the base compaction, and identify which Tremron product line you have. A low spot might be a base failure, a drainage problem, or both. We don’t guess – we dig down and look.
- 2
Repair or install. We remove the damaged units, recompact the base if needed, install replacement Tremron pavers or aftermarket matches, and refill joints with polymeric sand. On new paver installs, we cut, fit, and compact to the manufacturer’s recommended tolerances for South Florida conditions.
- 3
Test and finish. We run water over the repaired area to check drainage, walk the surface to verify it’s even, and clean any excess joint sand. We don’t leave until the surface is ready to use.
- 4
Warranty. Every Tremron repair job carries our 365-Day Done Right Promise in writing. If something fails within a year, we come back and fix it. No argument, no invoice.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in Fort Lauderdale
We work on all the major Tremron product lines you’ll find across Fort Lauderdale: Mega-Arbel for driveways and high-traffic areas, Olde Towne Cobble for patios and walkways with a classic tumbled look, Stonehurst and Estate Stone for larger-format surfaces and retaining walls. We stock common replacement pavers and wall blocks locally and can order specific Tremron units when your project needs an exact match. We also handle Tremron wall systems including retaining wall blocks, cap units, and edge restraints. If you’ve got Tremron product on your property and it’s failing, we can almost certainly tell you why – and fix it.
We Also Service These Brands
Tremron work is a big part of our Fort Lauderdale business, but it’s not all of it. We also install and service products from KraftMaid, Cambria, Silestone, and Kohler across full kitchen and bath remodels. If your hardscape is Tremron but your kitchen is Cambria, we can handle both. Same crew, same written-price guarantee, same 365-day warranty.
FAQs – Tremron Construction Service in Fort Lauderdale
Yes, as long as the base underneath is still stable. We pull the damaged units, inspect the base, recompact if necessary, and install replacement Tremron pavers from the same line (or a precise aftermarket match if the line is discontinued). If the base has failed, we’ll tell you before doing work that won’t last. Call (754) 354-7423 for a free estimate on paver replacement.
That white deposit is efflorescence, dissolved salts from inside the concrete rising to the surface as moisture evaporates. Fort Lauderdale’s salt air makes it worse. We clean the pavers, address any moisture source, and seal with a penetrating sealer rated for coastal conditions. The fix works as long as the moisture source is handled. Call (754) 354-7423 for an exact quote – estimates are free.
A sunken corner on a Tremron patio usually means the original base wasn’t compacted properly, or water has been eroding the soil underneath. Fort Lauderdale’s sandy native soil is especially prone to this. We excavate the affected section, recompact the base in lifts, and reinstall the original pavers if they’re still intact. Call (754) 354-7423 and we’ll diagnose the actual cause before quoting.
When we can source the matching Tremron wall block, we use it. When the product line is discontinued or backordered, we offer aftermarket blocks with the same dimensions and a disclosed color match. We’ll never install a mismatched block without telling you first. Every wall repair we do gets proper drainage behind the wall – that’s usually why it failed in the first place.
There’s no permanent weed-proof product, but polymeric sand is the closest thing. It hardens in the joints after activation, preventing weed roots from taking hold and keeping the pavers locked laterally. The catch is that it only works if the joints are properly prepared and the sand is installed dry and activated correctly. We’ve redone plenty of DIY polymeric sand jobs that hazed over or washed out. Call (754) 354-7423 for a written quote.
Tremron paver driveway installation in Fort Lauderdale typically runs $7,000 to $18,000. Paver patio installation runs $3,500 to $11,000. Roof repair (which often goes hand-in-hand with paver work on Fort Lauderdale homes) runs $400 to $1,800. Here’s the breakdown:
| Service | Price Range in Fort Lauderdale |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Roof Repair | $400 – $1,800 |
Your exact number depends on square footage, access, base conditions, and which Tremron product line you choose. Call (754) 354-7423 for a written line-item quote – free, no charge for the estimate.
Book Your Tremron Service in Fort Lauderdale, FL
If your Tremron pavers are settling, spalling, or growing weeds between the joints, we can tell you exactly what’s wrong and what it’ll cost to fix. Written price before work starts. Photo updates while we’re on the job. A full year of warranty after we leave. Call (754) 354-7423 to schedule your free estimate, or to talk through what you’re seeing on your Fort Lauderdale property.
Written by Luca Romano, Owner & Lead Contractor at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
