Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Plantation, FL | Sawyer Remodel Fort Lauderdale
We service, repair, and install Jerith aluminum fencing and railing across Plantation, from the 1960s ranch homes off Broward Boulevard to the newer condos along University Drive. The short answer on cost: a full Jerith aluminum fence install in Plantation runs $4,000 – $10,000 depending on linear footage, gate count, and whether tree permits or root-barrier work come into play. We’re an independent Jerith service provider, not manufacturer-affiliated, and we carry OEM parts plus color-matched local fabrication options for discontinued finishes. Call (754) 354-7423 for a free estimate with a written price before any work starts.
Why Plantation Residents Choose Us for Jerith Service
Jerith fences are built well, but they’re not built for South Florida’s particular abuse. Powder coat chalks under unshaded east-west sun in five to seven years. Posts set in shallow concrete heave after a summer of daily thunderstorms. Gates sag when hinge posts never got a proper curb. We see these patterns constantly in Plantation, because the housing stock here was largely built between the 1960s and 1980s, and a lot of those original installs are now at end of life. Luca Romano, owner and lead contractor at our General Contractor in Plantation, trained at Los Angeles Trade-Technical College reading structural plans and has spent years problem-solving tight older builds across Fort Lauderdale, including Plantation’s carport-era corner lots. The work either holds up or it doesn’t, and we make sure it does. We’re part of the Relay Home Co. family, founded in 2005, and every project runs under The Relay Visibility Guarantee: live arrival time, photo updates before and after, and a written price before a single tool is picked up.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Plantation
- Bronze powder-coat chalking and fading: Five to seven years of Plantation’s intense UV exposure breaks down the factory finish on dark bronze Jerith panels, especially along unshaded east-west fence lines. We wet-sand, prep, and color-match touch-up or full-panel refinishing so the fence doesn’t look two-tone.
- Loose or leaning posts from soil shift: Plantation sits on CBS-era soil that moves after heavy summer thunderstorms. Original 2-foot concrete footers heave and separate from Jerith’s post inserts, leaving panels leaning in wet marl. We dig new footers to 30 inches minimum, set galvanized inserts with rebar cages, and rehang the original rails and pickets.
- Gate sag and striker misalignment: Wide Jerith double gates on carport-era corner lots often sag because the original hinge posts were never set in concrete curbs. We pull the gate, re-set hinge posts in proper curbs, shim the hinges, and realign the striker so it latches square.
- Rust staining at rail-to-post connections: Older Jerith Estate series develops rust staining where the factory-applied interior coating has worn thin in Broward’s humidity, especially near irrigation overspray. We pull the rails, treat the corrosion, replace worn inserts, and reseat with proper sealant so it doesn’t return next wet season.
- Tree-root pressure on fence lines: Plantation’s live oaks create real pressure on Jerith posts set too close to root zones. When posts tilt because roots pushed against shallow footers, we either shift the line or switch to surface-mounted rail brackets so the tree and the fence both stay standing.
Jerith Service in Plantation: What Local Conditions Mean for Your Equipment
Plantation requires a tree permit and often a root-barrier detail before any excavation deeper than 12 inches within the drip line of a protected live oak. That ordinance changes how Jerith fence lines actually get built here, in a way Sunrise or Davie wouldn’t flag. A homeowner planning a Jerith fence along a back property edge can see the line shift several feet, or the crew switches to surface-mounted rail brackets, all to avoid killing a grand tree. We’ve done exactly that job. On a Jerith Estate aluminum fence off NW 5th Street near Plantation Isles, our crew found two original 1980s Jerith posts tilted 3 inches out of plumb because the original installer poured concrete only around the post tops, leaving the bottom half floating in soggy marl. We pulled the panels, dug new footers to 30 inches, set galvanized post inserts with rebar cages, and rehung the original Jerith rails and pickets after a wet-sand and touch-up of the bronze powder coat. The fence latched square, and the home’s protected gumbo limbo tree stayed untouched because we hand-dug within its root zone. That’s the kind of job-by-job dance Plantation demands, and it’s why we don’t template our Jerith work here.
Jerith Models & Products We Service in Plantation
We work on the full Jerith residential aluminum line: Premium Ornamental Aluminum Fence, Estate Aluminum Fence, Classic Aluminum Fence, and Vertical Aluminum Railing. We use Jerith OEM posts, rails, and caps whenever an existing run can be saved, but for color-matched repair sections on discontinued finishes, we source high-grade powder-coated aluminum from local fab shops we trust. If more than a third of the run shows structural post movement or coating failure, we show the math on replacing the entire fence versus band-aiding identical Jerith panels. For broader Jerith product guidance and sales, see our Jerith sales & service page. For Plantation coverage specifically, our Plantation service area page details response times and neighborhoods we cover.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Plantation
| Service | Price Range |
|---|---|
| Aluminum Fence Installation (Jerith) | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
What drives the cost in Plantation: linear footage, gate count, post depth (we go 30 inches minimum, not the old 2-foot standard), tree permit fees and root-barrier work, and whether the old posts are salvageable or need full replacement. Every estimate includes a written line-item price before work starts, so the number you approve is the number on the invoice. Call (754) 354-7423 for an exact quote, estimates are free and come with a written price in your hands before any tool is picked up.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Plantation
Yes, usually. For current Jerith finishes, we match with OEM powder coat. For older or discontinued bronze, we use a local fab shop’s color-matching system and blend the repair so the transition is nearly invisible. Call (754) 354-7423 for a free estimate, and we’ll bring finish samples to your Plantation home before quoting.
Not necessarily, but it can reshape the line. Plantation requires a tree permit and often a root-barrier detail before any excavation deeper than 12 inches within the drip line of a protected live oak. We’ll walk your lot, flag every protected tree, and adjust the fence line or anchoring method so the project passes inspection. Call (754) 354-7423 and we’ll assess your Plantation yard before you apply for any permit.
No. Gate sag on wider Jerith double gates is almost always a hinge-post problem, not a panel problem. The original hinge posts often weren’t set in concrete curbs, and after Plantation’s heavy thunderstorms the surrounding soil shifts. We re-set the hinge posts in proper curbs, shim the hinges, and realign the striker. Call (754) 354-7423 for an exact repair quote, estimates are free.
Usually yes, if the existing footers are sound and the post spacing lines up. We’ll extract the old chain-link posts, inspect the current concrete, and drop Jerith post inserts directly into the old footers when depth and condition allow. If the footers are shot from years of Plantation’s soil movement, we pour new ones to 30 inches. Call (754) 354-7423 and we’ll check the existing post conditions before quoting.
Yes. The Versailles scroll is a Jerith Classic line detail, and we can order the matching pickets and rails or fabricate color-matched scrolls locally if the finish is discontinued. We’ll match the existing powder coat, gate width, and hinge configuration so the new gate looks original to the house. Call (754) 354-7423 to schedule a free estimate for your Plantation ranch.
Service Areas Near Plantation
We provide Jerith service throughout Plantation and the surrounding Broward cities. Our crews cover Plantation, Fort Lauderdale, and Lauderdale-by-the-Sea regularly. For Jerith work east of Plantation, see our Jerith service in Fort Lauderdale page, and for beachside properties, our Jerith service in Lauderdale-by-the-Sea page has the details.
Book Your Jerith Service in Plantation Today
Whether it’s a leaning post, a sagging gate, Bathroom Remodeling - Plantation, or a full Jerith fence install in Plantation, we’ll give you a written price before any work starts. Call (754) 354-7423 and a live person answers, no voicemail loops. Luca and the crew handle Jerith work across Plantation every week, and we’ll get your fence standing straight and latching square.
Written by Luca Romano, Owner & Lead Contractor at Sawyer Remodel Fort Lauderdale, serving Plantation since 2005.
