Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Fence Installation: The Fort Lauderdale Owner’s Guide
Full Owens Corning fence installation in Fort Lauderdale typically runs $3,500 – $9,000 depending on linear footage, gate count, and whether we’re pulling an old fence first. Most standard backyard jobs land in the $4,500 – $6,500 range, and we can usually have the new run up within one to two days once materials are on-site. Owens Corning vinyl fencing, if we’re being honest, rarely has a true “failed part” in the way a spring or seal fails. What we actually see across Fort Lauderdale is wind damage, impact cracks, or a post that started leaning after a hurricane-force gust or a neighbor’s teenager backed into it. The product itself is tough. The install and the substrate it sits on are where things go wrong.
Key Takeaways:
- Installed cost for an average Fort Lauderdale backyard: $4,500 – $6,500
- Owens Corning parts can usually be matched by model line, not by a single “one-size-fits-all” kit
- Post failure is the most common issue we see, and it’s almost never the vinyl’s fault
- We’re an independent installer, not an Owens Corning dealer or affiliate
Which Owens Corning Models This Applies To
Owens Corning’s current residential fencing lineup breaks into a few core lines. You’ll usually find a tag or stamp on the back of a rail or the inside of a post showing the model name. The big three we run into in Fort Lauderdale are the Classic Series (basic square rails with a clean, flat face), the Deluxe Series (heavier rails, often with a beveled top or lattice option), and the Premier Series (the thickest wall profile, usually marketed for high-wind zones). Matching a replacement rail, post cap, or picket means knowing the series, because the pocket sizes and wall thicknesses are not interchangeable between them. A Classic picket won’t seat properly in a Deluxe rail.
Here’s the part most owners miss: Owens Corning uses a tongue-and-groove pocket system on most of its rails, and the picket width is consistent within a series but varies slightly across series. So you measure the picket width and the rail pocket depth before you buy anything. As for OEM versus aftermarket: OEM parts guarantee the color match, because Owens Corning’s white and tan are their own formulas. Aftermarket off-the-shelf vinyl from a big-box store won’t match after three years of Fort Lauderdale sun. If matching matters, go OEM. If the section is hidden or you’re okay with a subtle variance, a quality aftermarket replacement can save 20 – 30%.
Styles & brands we work with
Signs Your Owens Corning Fence Installation Is Failing
- Post lean after a storm: The vinyl didn’t fail. The post wasn’t set deep or wide enough in the concrete footing for Fort Lauderdale’s saturated soil, and now the entire section follows the lean. This gets worse after every heavy rain.
- Rail sag between posts: Owens Corning rails have a maximum span per series. If a previous installer stretched a rail beyond spec to save a post, it’ll start bowing within a couple of years. You’ll see it first at eye level on the longest run.
- Pickets popping loose at the bottom: Vinyl expands and contracts with heat. In Fort Lauderdale, the daily swing isn’t huge, but if a post shifts slightly and the rail twists, pickets will start backing out of their bottom pockets. It’s a geometry problem, not a materials defect.
- Gate dragging or won’t latch: Gates put all the fence’s weight on the hinge post. When that post moves just half an inch in sandy Florida soil, the gate drops, the latch misses, and suddenly you’re zip-tying your own fence shut.
- Chalky or discolored surface: Owens Corning vinyl has a UV-stabilized finish, but after 15+ years of Fort Lauderdale sun and salt air, the surface can start to chalk. It’s cosmetic, not structural, but it tells you the fence is entering its second decade.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest math for Fort Lauderdale. A single post reset runs $250 – $450 with materials. Replacing one full 8-foot section runs $350 – $700 including the section, rails, and installation. A full backyard run of 60 to 80 linear feet with one gate lands between $3,500 and $6,500. Go bigger, add a double gate, or tear out an existing wood fence first, and you’re into the $7,000 – $9,000 range. We don’t hide the haul-away charge or the concrete, either. The written price you approve before we start is the number on the invoice when we leave.
Every fence job we do includes removal and haul-away of the old run if one exists, new pressure-treated or steel-reinforced posts set to code depth, the Owens Corning panels and rails, gate hardware, and cleanup. The work carries our 365-Day Done Right Promise: if a post shifts or a rail fails within a year, we come back and make it right. No arguing. In writing.
DIY or Call Us?
Fencing is one of the safer projects a homeowner can take on, honestly. You’re not dealing with high-tension anything or electrical. But the part where DIY goes sideways in Fort Lauderdale is the post hole. Florida soil is sandy and wet, and if you auger a hole at 8 inches wide, drop in a post, and pour two bags of quikrete, it’ll lean within a year. Code in Broward County requires specific depth and footing diameter for fence posts, especially for anything over 4 feet tall. Get the hole right and the rest is straightforward. Get it wrong and you’ll pay someone to fix it later anyway.
If you want to check your existing fence, you can push on each post and see which ones flex at the base. That tells you which posts are shot. But for re-setting posts in our soil, matching Owens Corning rails correctly, or anything past a single picket swap, call us at (754) 354-7423. We’ll come look, measure, and hand you a written price while we’re there.
FAQs
With proper post installation, an Owens Corning vinyl fence in Fort Lauderdale’s climate realistically lasts 20 – 30 years. The salt air and UV exposure primarily affect color stability, not structural integrity. Posts set incorrectly are the thing that cuts that lifespan short, often within the first three to five years. If you’re seeing a leaning section already, the posts were the problem, not the vinyl. Call (754) 354-7423 and we’ll confirm what’s salvageable.
Yes, in almost every case you can replace one section or reset one post without touching the rest of the run. The key is matching the Owens Corning series so the color and profile line up. We’ll measure the existing pockets and pickets, source the correct part, and you’d never know which section was replaced. Call (754) 354-7423 and we’ll give you a written quote for just the affected section.
A standard backyard fence of 60 to 80 linear feet with one gate usually takes one to two days once materials arrive. Tear-out of an old fence adds a half day. The wildcard in our area is weather, afternoon thunderstorms on the Gulf side or a slow-moving summer front can push a pour to the next day. We’ll give you a real schedule before we start, not a vague window. Estimates are free at (754) 354-7423.
We keep common parts in rotation: post caps, pickets, rail sections, gate hinges, and latch assemblies for the Classic and Deluxe lines. If we don’t have the exact Owens Corning part loaded that day, we can usually have it in hand within a day or two in the Fort Lauderdale area rather than waiting a week for something from a regional distributor. The other brands we stock parts for on the remodel side include KraftMaid, Cambria, and Silestone, so we’re used to matching manufacturer-specific components. Call (754) 354-7423 and ask for the part you need.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
