Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock and install ES Windows-compatible windows and doors across Fort Lauderdale, with typical installed replacement costs landing between $4,500 and $25,000 depending on the unit size, series, and whether you’re swapping one sash or a full frame. Most owners discover they need us when a window won’t stay up, a door won’t close square, or the glass has gone hazy between the panes. We’re an independent service provider, not affiliated with ES Windows, but we know their hardware inside and out and keep the most common replacement parts in our trucks throughout Fort Lauderdale, from Victoria Park to Sailboat Bend and west into Riverside Park.
Here’s what we won’t do: sell you a part we haven’t matched to your exact frame. ES Windows uses several distinct extrusion profiles across their product generations, and a weatherstrip or roller meant for one series won’t seat correctly in another. Luca Romano has pulled apart enough of these units in Fort Lauderdale’s coastal buildings to know that salt air plus ten years of UV is the real test of a part’s worth.
Which ES Windows Models This Applies To
ES Windows produces a few primary lines you’ll find in Fort Lauderdale condos and single-family homes: the Signature Series, the Elite Series, and a builder-grade line common in multifamily construction from the early 2000s onward. The quickest way to identify yours is to open the sash and look for a silver or white sticker on the frame’s interior edge, usually on the hinge side. That label carries the model code, glass spec, and manufacturing date. If the sticker has faded or been painted over, we measure the frame depth and glazing bead profile against our master compatibility chart.
The OEM-versus-aftermarket decision on ES Windows parts comes down to one hard truth: certain components, especially the multi-point locking mechanisms and corner keys on newer units, have no true aftermarket equivalent. We’ll tell you when a part must come from the ES Windows distribution network, and we’ll tell you when a quality aftermarket roller or weatherseal performs identically for 30% less. There’s no markup incentive for us either way, we quote the installed price flat and it’s on you to compare.
Styles & brands we work with
Signs Your ES Windows Windows & Doors Is Failing
- The window won’t stay up without a prop. Most ES Windows sashes run on constant-force or block-and-tackle balance systems. When those coils snap or the block cracks, the sash drops like it’s decided to give up. This is the single most common call we take in Fort Lauderdale, especially on west-facing units where afternoon heat has slowly degraded the plastic components.
- You feel a draft even when the window is locked. Worn wool pile weatherstrip or a compressed rubber gasket on the frame means the sash isn’t seating. In Fort Lauderdale, that draft carries humidity, and humidity is what turns a small issue into a mildew problem inside the track.
- The sliding door grinds or jumps off its track. ES Windows sliding doors ride on tandem stainless or nylon rollers. Coastal salt gets into the bearing assembly, seizes it, and then the wheel flattens. You’ll hear it before you see it.
- Condensation between the glass panes. This means the insulated glass unit’s seal has failed. You cannot fix this with a kit. The IGU needs replacement, and we source those through ES Windows-certified glass fabricators to match the original Low-E coating and gas fill.
- The crank operator turns but the window barely moves. On casement and awning units, the operator gear strips over time. Some ES Windows operators are rebuildable; others are sealed units that need full replacement. We’ll identify which one you have before touching a screwdriver.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, expect a full window replacement to run $4,500 to $15,000 for a standard home, with impact-rated units pushing the range to $8,000 to $25,000 depending on the opening count and glass spec. If you’re replacing just a sash, balance system, or hardware pack rather than the whole unit, you’re usually looking at $150 to $900 in parts plus labor, and we’ll quote that in writing before any work starts.
What drives the price: whether the old frame can stay (less labor) or must come out (more), whether the unit is impact-rated or standard, and whether we’re pulling a permit for structural work. Every quote includes the parts, the labor, the haul-away, and a written workmanship warranty. The number we put in front of you is the number you pay. If something inside the wall doesn’t match what we expected, Luca stops and calls, he doesn’t proceed and then surprise you.
DIY or Call Us?
You can safely clean tracks, lubricate rollers with a dry silicone spray, and check for loose screws on the operator arm. Those three things fix maybe 15% of what we see. What you should not attempt is re-tensioning a balance spring on an ES Windows double-hung, or forcing a misaligned sliding door back onto its rail. The balance springs are under high tension, and the doors are heavy enough to crush fingers. That warning isn’t theater; we’ve repaired enough DIY attempts in Fort Lauderdale to know that a $40 part becomes a $900 frame repair when the glass gets yanked sideways.
If you’ve identified the part and just need it installed, call us at (754) 354-7423. We’ll tell you over the phone whether it’s something we can schedule that week, and we’ll bring the part with us on the first visit.
FAQs
In Fort Lauderdale’s salt-and-sun environment, expect 15 to 20 years from the frame and sealed glass unit before you’re replacing components seriously, with hardware like rollers and weatherstripping needing attention every 5 to 8 years. Coastal units on barrier islands like Fort Lauderdale Beach age faster than inland homes. Call (754) 354-7423 and we’ll give you an honest lifespan read on your specific unit.
Some components repair cleanly, like a roller that just needs cleaning and regreasing, or a winder handle that’s come loose from the spindle; others, like a snapped balance coil or a failed multi-point lock, are replacement-only by design. We’ll tell you which is which before quoting anything, and we never pad a repair into a replacement. Call (754) 354-7423 to describe what you’re seeing.
Most ES Windows hardware replacements take 1 to 3 hours on site once we have the correct part in hand, and full window replacements are usually a one-day job for standard openings, with a bit longer if we’re doing multiple units or dealing with stucco repair around the frame. Impact-rated installations can add a second day for testing and inspection. We’ll give you a firm window, not a vague range.
We stock the most common ES Windows rollers, balance systems, weatherseals, and operator arms on our service vehicles, so a large share of repairs happen on the first visit. Specialized parts like multi-point lock assemblies or custom IGU glass come from the ES Windows distribution network and typically arrive within 5 to 10 business days. Call (754) 354-7423 with your model number and we’ll confirm availability before you book.
Need a part matched, priced, and installed right? Call Sawyer Remodel Fort Lauderdale at (754) 354-7423 for a free estimate. Luca or one of the crew answers, not a call center. We’ll give you a written price before any work starts, and that’s the number you’ll pay.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
