Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Fort Lauderdale Owner’s Guide
Mr-Glass fence installation in Fort Lauderdale typically runs $3,500 to $9,000 installed, depending on the fence type, linear footage, and whether we’re replacing a failed panel or running a new line. We stock Mr-Glass-compatible panels, posts, and gate hardware on the truck, so most repairs and replacements are a single-visit job. The way most owners discover they need us: a post shifted after heavy rain, a panel cracked from a storm, or a gate that suddenly drags the ground and won’t close cleanly.
Fort Lauderdale’s salt air and summer storms do a number on fence hardware, and Mr-Glass fencing (glass and aluminum hybrid panels) is no exception. What wears first is almost always the post footing or the gate hinge assembly, not the glass itself. If your gate is binding or a panel is rattling, getting it addressed now prevents a cascading failure later.
Which Mr-Glass Models This Applies To
Mr-Glass fence systems fall into two main lines: the frameless glass panel series (used around pools and patios) and the aluminum-framed glass infill series (used for perimeter runs and driveway gates). The critical measurement isn’t the glass thickness (that’s usually 1/2-inch tempered in both lines), it’s the post size and the channel depth. Mr-Glass uses a 4-inch and a 6-inch square post profile depending on the series, and the glass channel is either 5/8-inch or 3/4-inch. If you swap panels without matching the channel, the glass will sit loose, rattle in the wind, and eventually crack.
Where possible, we recommend OEM panels for Mr-Glass systems because the aluminum coating is spec’d to match the original finish. Quality aftermarket equivalents exist for the posts and gates, and we use them on retrofits where a discontinued panel isn’t available. We’ll match the existing coating (powder-coated or anodized) so a new panel doesn’t look like a patch job. One thing to check: if your original panel has a small etched code near the bottom corner, that identifies the series. If it’s gone, we measure the channel and post and match it from there.
Styles & brands we work with
Signs Your Mr-Glass Fence Installation Is Failing
- Post lean after rain. Fort Lauderdale’s soil is sand mixed with periodic saturation, and a post without a concrete footer deeper than 24 inches will drift. A leaning post is the first sign the footing is undersized for our soil, and it won’t straighten itself.
- Gate dragging or binding. Hinge sag is usually wear in the hinge pin itself, not a bent frame. If you have to lift the gate to latch it, the hinge assembly has reached the end of its service life.
- Cracked or chipped glass panel. Tempered glass doesn’t crack on its own; it takes an impact (storm debris, a mower stone, a pressure-wash mistake). But in Fort Lauderdale’s heat, a small chip can spread through the panel edge within a season. Address chips quickly.
- Loose channels or rattles in wind. The rubber gaskets inside the glass channels compress over time and dry out in salt air. Once they’re shot, the panel flexes, and the flexing accelerates wear at the post connection.
- Discolored or peeling post coating. Salt air shortens the lifespan of any powder coat. Peeling at the base is cosmetic first, but once bare aluminum is exposed, the post will pit and eventually weaken at the anchor point.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a Mr-Glass-compatible fence installation runs $3,500 to $9,000, with the range driven by linear footage, how much of the old footing must be removed, and whether we’re matching an existing finish or starting fresh. Repair work (a single gate, one or two posts, a panel swap) lands at the lower end when the structure is sound; full perimeter replacements with a new gate run higher.
Every quote includes parts, labor, removal of the old section, concrete for new footings, and the 365-Day Done Right Promise in writing. That’s our guarantee: if the post shifts, the gate binds, or the panel rattles within a year of completion, we’re back at no charge. No separate charge for removal authorization, no “oh, we found a surprise” at the end of the job. The written price is the price.
DIY or Call Us?
You can check a few things without touching a tool: see if the post wobbles at the base, look for cracked channel gaskets, and note where the gate rubs. That’s useful information to have before you call. But fence installation on a Mr-Glass system isn’t a casual weekend project. Glass panels are heavy, and lifting one into a channel with improper angle or support can pinch fingers or crack the edge. The deeper issue is the footing: a Fort Lauderdale post without proper hole depth is going to lean within a year or two, and then you’re paying twice.
We pull permits where required, set footings to the depth our soil actually needs, and leave the site cleaner than we found it. Call us at (754) 354-7423 if you want a real assessment before the storm season hits again.
FAQs
A properly installed Mr-Glass fence with powder-coated aluminum posts lasts 15 to 20 years in Fort Lauderdale, though the post coating may need touch-up around year 10 due to salt air. Panels themselves last longer than the hardware, so a mid-life gate hinge replacement is normal and usually cheaper than people expect. Call (754) 354-7423 for a site assessment if your fence is over a decade old.
Yes, we can repair a Mr-Glass fence when the damage is confined to one panel, one post, or the gate assembly, and that kind of repair typically falls at the low end of the $3,500 to $9,000 range depending on what’s involved. If the footings are failing across multiple posts, a repair won’t hold and a replacement makes more sense. We’ll tell you which one you’re looking at without steering you toward a bigger job.
A typical Mr-Glass fence panel or gate repair in Fort Lauderdale is a single-day job; a full perimeter installation with new concrete footings usually runs two to three days, plus a day for concrete to set before final adjustments. We schedule, show up, and keep you posted with photo updates per The Relay Visibility Guarantee.
We stock the Mr-Glass fence components that wear out most in Fort Lauderdale, including gate hinges, channel gaskets, post caps, and anchor hardware, so most calls are one-visit fixes. For a cosmetic match on a full panel replacement, we may order from a supplier, which adds a few days, and we confirm the lead time before you approve anything.
Call (754) 354-7423 to schedule a free Mr-Glass fence installation estimate in Fort Lauderdale. We’ll assess the fence, give you a written price, and tell you what’s needed in plain terms.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
