Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you have a Barrette kitchen remodel that’s showing its age, a full replacement in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether we’re moving plumbing or electric. We stock Barrette-compatible hardware, hinges, drawer slides, and trim, and we can usually get replacement components matched to your existing layout within a few days. Most homeowners discover the failure the same way: a drawer that sticks, a soft-close hinge that stopped catching, or a laminate edge that peeled back after a few humid summers. The good news is that you rarely need to tear everything out. Often the fix is component-level, and we’ll tell you straight if that’s the case.
We’re an independent service provider, not affiliated with or endorsed by Barrette. We install, repair, and replace the product itself because it’s what a lot of Fort Lauderdale kitchens were built with, and we know exactly how it behaves in this climate.
Which Barrette Models This Applies To
Barrette’s kitchen line spans a few distinct series, and the parts are not always interchangeable across them. The biggest compatibility gotcha we run into is hinge mounting pattern. Barrette’s earlier cabinet lines used a 35mm cup hinge with a 48mm screw spacing, while their newer soft-close series moved to a 45mm spacing. If you order a replacement hinge off a generic site, you’ll get something that looks right and drills wrong. We check the old hinge before ordering anything.
The fastest way to identify what you have is to pull one drawer out and look for the stamped code on the drawer box side, usually a date code plus a two or three-letter series marker (something like “BQ-SC” for the soft-close run). If the sticker’s gone, we measure the hinge cup, the overlay, and the drawer slide length, which tells us what we’re dealing with in about ten minutes.
For Barrette specifically, OEM parts are worth it on soft-close hinges and undermount drawer slides. The aftermarket equivalents exist, but they’re often sized a hair off, and that hair translates to a drawer that rubs after two months. For face frame screws, shelf pins, and toe kick clips, a quality aftermarket match is fine and costs less. We carry both on the truck and we’ll show you the difference before you pay for anything.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
Here’s what actually shows up first, because in Fort Lauderdale humidity and daily use do most of the damage long before the cabinets themselves give out.
- A drawer that sticks or drags on the right side. This is almost always a worn undermount slide or a slide that’s picked up grit. In coastal Fort Lauderdale air, the slide bearings corrode faster than inland. The drawer itself is usually fine.
- A soft-close hinge that slams instead of catches. The hydraulic damper inside the hinge cup fails after roughly 10,000 cycles. On a heavily used cabinet door, that’s four or five years. Replacing the hinge is a fifteen minute job, not a cabinet replacement.
- Laminate edging lifting on doors below the sink or near the dishwasher. Steam and humidity break down the adhesive bond on thermofoil and laminate edges. This is the most common Barrette failure we see in Fort Lauderdale kitchens, and it’s repairable if caught before the MDF core swells.
- A cabinet door that won’t stay aligned no matter how much you adjust it. This usually means the hinge plate screws have stripped out of the face frame. The fix is a threaded insert or a move to a different hinge plate, not a new door.
- Shelves bowing in lower cabinets. Barrette’s standard 5/8-inch shelf material handles most loads, but heavy pots and cast iron will sag it over time. We cut replacement shelves from 3/4-inch plywood and edge-band them to match.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Barrette kitchen remodel in Fort Lauderdale runs $14,000 to $45,000. Here’s the line-item view so you know where the money goes:
- Kitchen remodel, full scope: $14,000 – $45,000
- Small kitchen remodel (galley or condo-size): $9,000 – $20,000
- Cabinet installation or replacement: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: the number of cabinets, whether you’re keeping existing boxes and replacing doors and hardware only, and what countertop you choose. A quartz top runs more than laminate, and moving a sink or range adds plumbing and electrical. Every quote we write includes parts, labor, haul-away of the old material, and the written price lands in your hands before we touch a tool. The number you approve is the number on the invoice. We also stand behind it with the 365-Day Done Right Promise: if it’s not done right, we make it right, in writing, for a full year.
DIY or Call Us?
Replacing a shelf pin or tightening a hinge screw, that’s a five minute job you can do yourself. Replacing a drawer slide or a soft-close hinge, that’s also doable if you have the right parts and a Phillips driver. Where DIY goes sideways is when the failure is in the cabinet box itself: a swollen sink base, a stripped face frame, or a door that’s warped past adjustment. At that point you’re not saving money, you’re just delaying the fix and making the eventual repair bigger.
One honest note: if a hinge or slide has failed and the door has been slamming for months, the surrounding cabinet frame has likely taken stress damage. That’s not a parts swap, that’s a rebuild. We’ll tell you which one you have before any work is quoted. Call (754) 354-7423 and we’ll come look.
FAQs
Barrette kitchen cabinets last 15 to 25 years in Fort Lauderdale, but the hardware (hinges and slides) typically needs replacement at the 5 to 8 year mark in humid or coastal conditions. The cabinet boxes outlast the moving parts by a wide margin. Call (754) 354-7423 and we’ll assess what still has life in it versus what’s done.
No, failed soft-close hinges and undermount drawer slides are sealed units and can’t be rebuilt; they get replaced with matching OEM or upgraded parts. What can be repaired is the cabinet frame around them, which is often the better long-term fix. Call (754) 354-7423 for an honest read on which one you need.
A component-level repair like swapping hinges and slides on a standard kitchen takes one day; a full Barrette kitchen remodel in Fort Lauderdale typically runs 3 to 6 weeks depending on countertop lead time and whether plumbing or electrical moves. We give you the timeline in writing before work starts. Call (754) 354-7423 to schedule a free estimate.
We keep common Barrette-compatible hinges, drawer slides, shelf pins, and bumpers on the truck, and we order series-specific OEM parts direct when the job calls for an exact match. Most Fort Lauderdale jobs are parts-complete within a few business days. Call (754) 354-7423 and we’ll check your specific model before we come out.
If you’re tired of a drawer that sticks and a door that slams, call Sawyer Remodel Fort Lauderdale at (754) 354-7423. We’ll price the repair or the full remodel in writing, show up when we say we will, and leave the kitchen working. That’s the whole job.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
