Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Fort Lauderdale Owner’s Guide
Tremron roofing parts in Fort Lauderdale typically run $600 – $2,500 installed for tile repair and $8,000 – $20,000 for a full replacement, depending on how much of the roof is involved. We stock common Tremron-compatible tile profiles and flashing kits on our trucks, so most repairs are one visit. You’ll usually discover the problem the same way everyone does: a brown stain on the ceiling after a hard South Florida downpour, or a tile you spot in the yard after a wind gust off the Atlantic.
Tremron makes concrete roof tile and pavers, and their roofing tile has held up across Broward County for decades. But hurricanes, salt air, and the relentless UV down here find the weak points: cracked tiles, worn underlayment, and flashing that’s pulled away from the chimney or a valley. When that happens, you need the right part matched to your existing profile, not a generic tile that sits proud and catches wind. That’s where we come in.
Key Takeaways:
- Most Tremron tile repairs in Fort Lauderdale land between $600 and $2,500 installed.
- We carry common Tremron-compatible flat and S-tile profiles on the truck for single-visit repairs.
- Salt air and hurricane uplift shorten underlayment life to roughly 15 – 20 years here, even when the tile itself still looks fine.
- You get a written price before work starts, and the 365-Day Done Right Promise backs the fix.
Which Tremron Models This Applies To
Tremron’s roofing tile lines fall mostly into two profiles: flat tile (sometimes called shake or slate profile) and S-tile (the barrel-shaped Mediterranean look you see all over Fort Lauderdale neighborhoods like Victoria Park and Rio Vista). Within those two shapes, Tremron has produced several color blends over the years, and the gotcha is this: the same profile in a different color batch won’t match your roof. A 2020 terracotta blend is not the same as a 2015 terracotta blend. The tile dimensions are identical, but aged color is the fingerprint you’re matching.
To identify your tile, look for the manufacturer stamp on the underside of a loose tile, or measure it. Most Tremron flat tiles run about 13 inches wide by 16 inches long. S-tiles are longer, around 17 to 18 inches, with a curved nose. If you can’t find a stamp, text us a photo of the tile profile and the roof from the street. We’ve matched enough of these across Fort Lauderdale that we can usually identify the profile and the color range before we even schedule the visit.
On the OEM-vs-aftermarket question: for tile replacement, a quality concrete tile from a compatible manufacturer often works fine, as long as the profile and color blend are right. But for underlayment, we don’t compromise. We use manufacturer-backed synthetic underlayment rated for Miami-Dade wind uplift, because in Fort Lauderdale, the underlayment is what actually keeps water out of your house. The tile is mostly UV protection and ballast. That’s a distinction a lot of roofers won’t explain.
For the record: Sawyer Remodel Fort Lauderdale is an independent contractor. We’re not affiliated with Tremron, and we don’t claim to be. We just know their products and how to fix them properly.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
Roof problems in Fort Lauderdale don’t usually announce themselves loudly. They start small and compound. Here’s what we see most often on service calls across the area, from Coral Ridge to Sailboat Bend:
- Ceiling stains or drips after rain. This usually means the underlayment has failed somewhere above, not necessarily where the stain shows. Water travels along the decking before it finds a seam to drip through. By the time you see it inside, the leak has been running for a while.
- Broken or cracked tiles after a storm. Falling branches and wind-driven debris crack tiles. A cracked tile by itself isn’t an emergency, but it exposes the underlayment below. Once that synthetic layer starts baking in the sun, it degrades fast.
- Tiles in the yard or gutter after high winds. South Florida wind uplift is real. If tiles are lifting, the fastening system (screws or nails plus foam adhesive) has likely loosened over years of thermal cycling. Loose tiles become projectiles in the next named storm.
- Granule loss or chalky residue on the tile surface. Concrete tiles shed a fine surface layer over time. Some is normal. If you can rub the tile and pull away noticeable grit, the tile’s protective surface has weathered and it’s more porous now, which means more water absorption and faster breakdown.
- Flashing pulling away from chimneys, skylights, or valley intersections. Salt air corrodes metal flashing faster in Fort Lauderdale than almost anywhere inland. Once flashing lifts, water gets under the tile system entirely. This is the number one source of “mystery leaks” we find on Tremron roofs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the straight pricing for Tremron-compatible roofing work in Fort Lauderdale:
| Service | Installed Price Range |
|---|---|
| Tile roof repair (cracked tile replacement, flashing repair, small underlayment patch) | $600 – $2,500 |
| Full roof replacement (tear-off, underlayment, tile reset or new tile) | $8,000 – $20,000 |
The repair range depends on how many tiles need to come off to reach the failed section, whether the underlayment beneath is damaged, and how high the work is. A one-story repair on a gentle slope costs less than a two-story job off a steep pitch near the Intracoastal. Every quote we give is a written line-item price before any work starts. You’ll know what the tile costs, what the labor costs, and what the disposal costs. The invoice at the end matches the number you approved.
Every repair carries the 365-Day Done Right Promise. If it’s not done right, we make it right, in writing. That covers any leak that traces back to our repair within a full year. No arguing, no chasing. Luca Romano has been doing this long enough to know that a roofer who won’t back their work isn’t worth their ladder.
DIY or Call Us?
You can safely do one thing yourself: inspect from the ground with binoculars, or take photos from a ladder placed on solid ground. Look for missing tiles, lifted flashing, and cracked edges. That tells us what we’re walking into and speeds up the estimate.
Walking a tile roof is not a DIY job. Concrete tile is brittle, and stepping in the wrong spot cracks tiles that were perfectly fine. Working on a Fort Lauderdale roof also means working at height, usually on a slope, often in heat that hits 90 degrees by mid-morning. A fall from even a single-story roof can change your life. We send background-checked, uniformed technicians who do this every week, with proper fall protection and a plan for where to step. The repair is not where you save money. The risk is not worth it.
If you suspect a leak or see storm damage, call (754) 354-7423 and we’ll walk you through what to look for from the ground before we send anyone out.
FAQs
Concrete roof tile itself can last 40 to 50 years, but the underlayment beneath it typically fails in 15 to 20 years in Fort Lauderdale because of salt air, humidity, and UV exposure. So the tile you see may look fine while the water barrier underneath is already done. Call (754) 354-7423 and we’ll give you an honest read on what’s worth fixing now versus planning for later.
Small hairline cracks can sometimes be sealed with an elastomeric patch compound, but in Fort Lauderdale’s heat and rain, a patched tile rarely lasts more than a couple of seasons. Replacement is the real fix. If the crack is wide or the tile is broken through, we replace it, period.
Most single-tile replacements and flashing repairs take one visit, usually two to four hours once we’re on the roof. If we’re opening up underlayment to find and fix a leak, add a second visit to let the patch cure before tiles go back on. You’ll get a live arrival time before we show up, plus before-and-after photos of the work.
We carry common Tremron-compatible flat and S-tile profiles in the most popular Fort Lauderdale colors on our trucks. If we don’t have your exact color blend, we’ll source it and match to the original before installation. We’ll confirm availability when you call for the estimate, so there are no surprises on the day of the repair.
If your Tremron roof is showing signs of trouble, don’t wait for the next storm to make it worse. Call (754) 354-7423 to schedule a free estimate. You’ll get a written price before any work starts, and a fix that holds up. The work either holds up or it doesn’t – we make sure it does.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
