Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Fort Lauderdale Owner’s Guide
Quikrete fence installation in Fort Lauderdale typically runs $3,500 to $9,000 for a complete project, including concrete footings, post setting, and panel installation. We stock Quikrete fast-setting concrete mix on our trucks and can usually begin within a week of your estimate. Most homeowners find out their fence has an issue the hard way: a post starts leaning after a hard South Florida rain, or the gate drags across the driveway because the footing settled. Fort Lauderdale’s high water table and sandy soil mean concrete footings either hold or they don’t, and when they don’t, you’ll see it fast.
Which Quikrete Models This Applies To
Quikrete doesn’t make fence panels or posts. What they make is the concrete that holds your fence up, and that’s where the compatibility question actually lives. We work with every standard Quikrete concrete product used in Fort Lauderdale fence work: the 50-lb Fast-Setting Concrete Mix (the red bag most pros grab for posts), the standard 60-lb and 80-lb Concrete Mix, and Quikrete 5000 for heavyweight gates and corner posts that carry real load. For vinyl fence installation, the post hole diameter and depth matter more than the brand of mix, but we’ve found the fast-setting formula performs better in Fort Lauderdale’s wet soil because it cures before groundwater seeps in and weakens the set. One gotcha: Quikrete fast-setting mix starts curing in about 20 to 40 minutes once water hits it, so in the summer heat you’re working fast or you’re wasting a bag. On the aftermarket side, any Portland cement mix works, but the per-bag cost difference is small enough that we default to Quikrete for consistency. Sawyer Remodel Fort Lauderdale is an independent service provider, not affiliated with Quikrete, but we’ve poured enough of their mix to know exactly how it behaves in this climate.
Styles & brands we work with
Signs Your Quikrete Fence Installation Is Failing
- Post lean in one direction. The concrete footing has cracked or was poured too shallow for Fort Lauderdale’s sandy soil. Once a post starts leaning, it keeps going.
- Gate drags or won’t latch. The hinge-side post is shifting, which usually means the footing was undersized or water has eroded around it.
- Concrete collar visible above soil line. Whoever poured the footing didn’t go deep enough, and now the concrete puck is lifting out of the ground like a bad tooth.
- Posts are straight but panels are bowing. The concrete is fine; the pressure-treated or vinyl post itself has absorbed moisture and is twisting inside the set concrete.
- Water pools at the base after rain. Fort Lauderdale’s flat grade means drainage becomes the fence’s problem. Standing water softens the soil around the footing and accelerates settlement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Quikrete-related fence repairs in Fort Lauderdale fall between $350 and $1,800 when we’re pulling and resetting individual posts. A full fence installation runs $3,500 to $9,000 depending on linear footage, fence style (vinyl costs more than pressure-treated wood), and access. The price includes removing failed posts, digging new holes to proper depth, pouring Quikrete fast-setting mix, resetting posts plumb, and reattaching panels or rails. We give you a written line-item price before any work starts, so you know exactly what the concrete, labor, and replacement posts cost. The work carries our 365-Day Done Right Promise: if a post shifts or a gate sags within a year because of our install, we come back and fix it. No invoice surprises, no change orders.
DIY or Call Us?
Replacing a fence post in Fort Lauderdale is not inherently dangerous work the way tension springs are. You can dig a hole, drop a bag of Quikrete in, add water, and be done in an afternoon. What goes wrong is the details: hole depth below the water table, proper drainage gravel, post alignment while the concrete cures, and Fort Lauderdale’s sandy soil requiring a wider footing than most DIY guides suggest. We’ve seen weekend projects where every post was plumb at sunset and leaning by the next June. If you want to tackle it yourself, check that your hole is at least a third as deep as the post is tall and use a level on two faces before the mix sets. If that sounds like more than you signed up for, call (754) 354-7423 and we’ll handle the digging, the concrete, and the cleanup.
FAQs
A properly poured Quikrete footing in Fort Lauderdale should last 15 to 25 years, though vinyl panels and wood posts typically need attention first. The concrete usually outlives what it’s holding.
Yes, in most cases we can pull the old post, clean the hole, pour fresh Quikrete, and reset the same post if it hasn’t rotted or twisted. If the post itself is compromised, we’ll quote a replacement post as part of the same visit. Call (754) 354-7423 for an exact number.
A single post replacement takes about 2 to 3 hours including digging, mixing Quikrete, and resetting. A full fence installation in Fort Lauderdale typically runs 2 to 4 days depending on footage and site access.
We keep Quikrete Fast-Setting Concrete Mix and standard Concrete Mix on hand for every fence job, so there’s no separate trip to the supply yard holding up your install. We also stock KraftMaid, Cambria, and Silestone materials for the remodeling side of our work.
If your fence is leaning, your gate is dragging, or you’re planning a new fence and want the concrete done right the first time, call (754) 354-7423. We’ll give you a written price, a straight answer on what’s actually wrong, and a timeline we’ll stick to.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
