Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Roofing: The Fort Lauderdale Owner’s Guide
If your Cover roofing system has failed, we stock and install Cover-compatible roofing components across Fort Lauderdale, with most repairs running between $400 and $1,800 installed depending on the damage. Same-week scheduling is typical for non-emergency work, and we carry the common failure parts on our trucks so the first visit is usually the only visit. Most owners discover the problem the hard way: a water stain on the ceiling after a heavy afternoon storm, or a roofing crew pointing out cracked flashing during a routine inspection.
Sawyer Remodel Fort Lauderdale is an independent installer and repair provider. We are not affiliated with Cover, but we work with their roofing systems regularly and know where they hold up and where they fail in South Florida’s climate.
Which Cover Models This Applies To
Cover’s roofing line includes both architectural asphalt shingle systems and standing-seam metal profiles, and the parts that fail are rarely interchangeable between the two. If you have the original paperwork from your installation, check the line item for the series designation: Cover’s metal roofing uses a 24-gauge standing seam panel with a 1-3/4 inch rib height, while their shingle line is a laminated architectural shingle rated for 130 mph wind uplift when installed to manufacturer spec. The model plate is usually stamped on the underside of the ridge cap or on the original contract, not on the shingles themselves.
For shingle systems, the compatible underlayment matters more than most Fort Lauderdale homeowners realize. Cover specifies a synthetic, high-temperature underlayment rated for 250°F surface contact, which matters when your roof deck hits 160°F in August. A standard 15-pound felt underlayment installed by a well-meaning handyman will fail years early under that kind of heat. For metal systems, the failure points shift to the fasteners and closures: Cover’s system uses a specific neoprene-washer screw with a 15-year washer life rating, and after eight to ten years in salt air near Las Olas or Rio Vista, those washers crack and let water wick under the panel. We stock both the OEM fasteners and a quality aftermarket equivalent with a thicker EPDM washer that holds up slightly better in coastal exposure.
Styles & brands we work with
Signs Your Cover Roofing Is Failing
- Water stains on ceilings after heavy rain. This is the most common first sign, and it usually points to failed flashing at a penetration rather than the shingle field itself. Chimneys, vent pipes, and skylights are the usual suspects, and the fix is often under $1,000 if caught early.
- Granules in gutters or downspouts. If you’re finding gritty black or gray granules piling up at downspout elbows, the shingle surface is eroding. In Fort Lauderdale’s UV intensity, a ten-year-old Cover shingle can lose 30% of its granule layer and still look fine from the street.
- Curling or lifting shingle edges at the eaves. This is usually wind damage, and it’s more common on the east-facing roof slopes that take the brunt of afternoon sea breeze gusts. Once edges lift, water gets under the shingle and starts working the underlayment.
- Rust streaks or fastener backout on metal roofing. If you see reddish-brown streaks running down from screw heads on a Cover metal roof, the washer has failed and the screw is corroding. Replacing the fastener and washer is a quick fix if caught before the panel itself rusts through.
- Daylight visible in the attic through the roof deck. This one is a red flag, not a wait-and-see item. If you can see light pinholes from inside the attic during the day, water is already getting in and the decking under the roofing is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair in Fort Lauderdale runs $400 to $1,800 for typical Cover-system problems, and most repairs fall in the $500 to $900 range. A full roof replacement on a Cover system runs $8,000 to $20,000 depending on square footage, roof pitch, and whether the decking needs to come out. For metal roof installation, which some Cover owners consider as an upgrade path, plan on $15,000 to $40,000.
Here’s the honest breakdown of what drives the number on a repair:
- Small flashing repair or shingle patch: $400 to $700
- Vent pipe collar replacement: $250 to $500
- Metal roof fastener and washer replacement (localized, up to 20 fasteners): $500 to $900
- Underlayment repair under a shingle section: $600 to $1,200
- Full roof replacement (Cover shingle, standard 2,000 sq ft home): $8,000 to $16,000
- Full roof replacement with decking repair: $12,000 to $20,000
Every repair includes the written price before work starts, the labor, the parts, and our 365-Day Done Right Promise. If the repair doesn’t hold for a full year, we come back and fix it at no cost. That’s in writing on every job, not something you have to negotiate for.
DIY or Call Us?
You can check a few things safely from the ground or a ladder without touching the roof: look for missing or curling shingles, check gutters for granules, and shine a flashlight in the attic on a sunny day. But the moment you’re tempted to climb onto a roof in Fort Lauderdale’s heat, especially on a two-story near Victoria Park or Coral Ridge, you should call a professional. Roof work in South Florida means steep pitches, slick tiles after morning dew, and surface temperatures that hit 140°F by mid-morning. Falls from single-story roofs put more people in the ER than most homeowners realize.
For anything that involves removing shingles, touching flashing, or walking the roof line, call (754) 354-7423. We’ll come out, assess it, and hand you a written price before any work starts.
FAQs
A properly installed Cover architectural shingle roof lasts 15 to 20 years in Fort Lauderdale’s climate, though coastal homes within a mile of the ocean may see 12 to 15 years due to salt exposure and higher wind stress. Metal Cover systems can go 30 to 40 years, but the fasteners and washers typically need replacement every 10 to 15 years regardless of the panel’s condition. Call (754) 354-7423 if you want us to assess where your roof is in that lifespan.
Yes, localized damage is repairable in most cases: a cracked flashing, a failed vent collar, or a section of lifted shingles is a repair job, not a replacement. The decision usually comes down to whether the underlayment and decking are still sound, which we check with a moisture meter before giving you a number. Call (754) 354-7423 for a free estimate and we’ll tell you what’s repairable and what isn’t.
Most flashing and shingle repairs take one to three hours on-site, and we’ll have the written price approved before we start so you know the job is done the same afternoon. Larger repairs involving underlayment or decking sections may take a full day, and we’ll set that expectation upfront. Call (754) 354-7423 to schedule an assessment.
We stock the common Cover failure components on our trucks: flashing kits, vent collars, neoprene and EPDM washers, fasteners, and sealants matched to Cover’s specifications. For full roof replacements, we order the shingle or panel product directly through our material partnerships with GAF, CertainTeed, and Owens Corning, plus metal panel suppliers across Broward County. If you have a specific Cover series, call (754) 354-7423 and we’ll confirm parts compatibility before the first visit.
If your Cover roof is leaking, lifting, or shedding granules, don’t wait for the next storm to make it worse. Call (754) 354-7423 and we’ll send a background-checked technician to assess it, photograph what we find, and hand you a written price. The work either holds up or it doesn’t, and we make sure it does.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
