Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The Fort Lauderdale Owner’s Guide
Dvele fence installation in Fort Lauderdale typically runs $3,500 to $9,000 installed, depending on the fence length, material spec, and how much of the existing post system can be reused. We stock Dvele-compatible fence hardware and panels locally, and most jobs are completed in one to two days once materials are confirmed. Homeowners usually discover a problem the same way: a gate stops latching after a storm, a corner post leans slightly after heavy rain, or a panel that was tight last season now rattles when the wind kicks up off the Intracoastal.
Dvele homes are built as high-performance, prefabricated systems, which means the fence and gate assemblies were engineered to fit specific post spacing and panel dimensions from the start. When a Dvele owner in Fort Lauderdale needs fence work, they need someone who understands that compatibility matters. Luca Romano and our team at Sawyer Remodel Fort Lauderdale have worked on enough Dvele properties across Broward County to know exactly what we’re walking into before we quote it.
Which Dvele Models This Applies To
Dvele’s residential product lines share a consistent exterior fence hardware platform, but there are real differences between their earlier homes and the current generation builds. The original Dvele homes in the Fort Lauderdale area, especially along neighborhoods near Victoria Park and Rio Vista, tend to use aluminum post systems with a powder-coated black or bronze finish. Newer Dvele builds, including the larger single-story and two-story models with wider lots, often use extruded aluminum panels that slot into pre-set concrete footers.
The compatibility gotcha we see most often is post spacing. Dvele’s panel modules are built around a 6-foot and 8-foot post-to-post span. If you measure your existing posts and they sit at 7 feet, 4 inches, or some other spacing that’s close but not exact, you likely have a custom gate or corner assembly that needs a field-measured replacement rather than an off-the-shelf panel. That’s the difference between a fence that looks right and one that fits right.
When it comes to OEM versus aftermarket, we recommend staying with Dvele-spec hardware for anything structural: posts, gate hinges, latch assemblies, and corner brackets. For panels and pickets, there are quality aluminum equivalents that match the profile and finish well. The decision comes down to whether the part carries load or just fills space.
Styles & brands we work with
Signs Your Dvele Fence Installation Is Failing
- Gate sag that worsens after rain. The soil in Fort Lauderdale is mostly sand and muck over limestone. When a gate post’s concrete footer wasn’t deep enough, heavy rain loosens the surrounding soil and the post shifts. You’ll see the gate scrape the ground or the latch miss the strike plate. The fix is usually a deeper-set post, not just a hinge adjustment.
- Panels that bow or pop out of the frame. Salt air is brutal on aluminum and its fasteners. We regularly replace fence sections within a mile of the beach where the original hardware has corroded enough to let panels flex. What starts as a rattle becomes a panel on the ground after a stiff storm.
- White oxidation streaks on dark posts. This isn’t just cosmetic. When powder coat fails and the raw aluminum is exposed to coastal moisture, pitting follows. Over a couple of seasons, pitted aluminum loses structural strength at connection points. It’s the most common early warning sign on Dvele fences we service in Fort Lauderdale.
- Gate binding at the top hinge. Dvele gate assemblies use a continuous hinge on many models. When the top mount loosens, the gate torques and binds. Homeowners often keep using it anyway, which stresses the bottom hinge until it fails. If your gate doesn’t swing with one hand, stop forcing it.
- Loose or leaning corner posts. Corner posts carry tension from the entire adjacent run. A leaning corner means the footer was undersized or undermined. In sandy Fort Lauderdale soil, a corner post with a 12-inch footer will eventually lean no matter what brand of fence is attached to it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale Dvele homeowners, a full fence replacement lands between $3,500 and $9,000. At the lower end, you’re looking at a shorter run, maybe 40 to 60 linear feet, with existing posts in good shape that can be reused after inspection. At the higher end, we’re replacing 100-plus linear feet with new posts, new concrete footers, and a gate assembly, plus hauling off the old material.
Here’s how the cost typically breaks down on a mid-range Dvele fence project:
- Permit and HOA coordination: $150 to $450, depending on your municipality and whether your HOA requires a pre-approval. Fort Lauderdale proper and several surrounding cities have distinct fence height rules, so we handle this before materials are ordered.
- Post removal and new concrete footers: $45 to $85 per post, including demolition, concrete, and resetting. Most Dvele fences need footers at least 24 inches deep to handle wind load and sandy soil conditions.
- Fence panels and hardware: $2,200 to $6,000 depending on run length, panel material, and finish. We pass through material at cost plus a markup that’s disclosed in the written price before any work starts.
- Gate assembly (if replacing): $500 to $1,400 for a standard walk gate or drive gate, including hinges, latch, and adjustment.
- Labor and cleanup: $1,200 to $2,800, which includes old fence haul-off and a final walkthrough with photo documentation.
Every Dvele fence installation from Sawyer Remodel Fort Lauderdale includes our 365-Day Done Right Promise in writing. If a panel shifts, a gate sags, or a footer settles within the first year, we come back and make it right. No charge, no argument.
DIY or Call Us?
There are a few things you can safely check yourself. Look at your gate hinges for loose screws and tighten them with the right bit. Check that post caps are seated. Clear dirt and debris from the base of posts so water doesn’t pool. Those are inspection tasks any homeowner can handle.
But fence installation that involves removing posts, pouring new concrete footers, or matching Dvele panel dimensions is not a weekend project. A post that’s set slightly out of plumb will throw off panel alignment across the entire run. A footer that’s too shallow in Fort Lauderdale’s sandy soil will fail within a year or two. Aluminum panels under tension are not dangerous the way a garage spring is, but the work is precise. One bad post means pulling the next section apart to fix it. If you’re unsure whether your fence needs repair or replacement, call (754) 354-7423 and we’ll tell you straight what you’re looking at. The estimate is free.
FAQs
A properly installed Dvele-spec aluminum fence lasts 20 to 30 years in Fort Lauderdale, but the hardware and fasteners typically need attention every 7 to 10 years because of salt air and humidity. Call (754) 354-7423 for an inspection if your fence is over a decade old and showing white oxidation.
Yes, in most cases a single post or panel section can be replaced without redoing the whole fence, as long as the adjacent sections are still square and the footers are sound. The exception is when corrosion has compromised multiple connection points; at that point, a partial repair just delays a full replacement by a year or two.
Most Dvele fence installations in Fort Lauderdale take one to two days from post removal to final gate adjustment, not including any HOA or permit waiting period. Concrete footers need a day to cure before panels go up, but the actual on-site work is fast once materials are staged.
We carry common Dvele-spec hardware including gate hinges, latches, post caps, and panel fasteners on our service trucks, which means many repairs happen in a single visit. For full panel replacements, we order to match your specific Dvele model and finish, which usually takes three to five business days.
Ready to get your Dvele fence looked at? Call Sawyer Remodel Fort Lauderdale at (754) 354-7423 to schedule a free estimate. We’ll send a background-checked technician with a written price before any work starts, live arrival tracking, and before-and-after photo updates, exactly how we run every job under The Relay Visibility Guarantee. We also stock parts for KraftMaid cabinetry, Cambria surfaces, and Silestone counters, so if the fence leads to another project, we can handle that too.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
