







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Fort Lauderdale Owner’s Guide
If you’re looking for Barrette driveway and paver parts in Fort Lauderdale, we stock the common failure items and can source anything else from Barrette’s full catalog, usually within a few days. Installed pricing for paver and driveway repairs in this market typically lands between $400 and $2,500 depending on what’s actually worn out. Most driveway failures show up as an edge that’s starting to heave, a corner paver that’s cracked clean through, or sand washing out after every hard rain. The telltale sign in a neighborhood like Victoria Park or Sailboat Bend is usually a low spot that holds water for two days after a storm, or a section that’s sunken enough to catch the front edge of a tire when you pull in.
Which Barrette Models This Applies To
Barrette’s paver and driveway line isn’t one product family with interchangeable SKUs, which is where a lot of homeowners get tripped up. The border systems, jointing sand, and underlayment all spec differently between their concrete pavers, their stone-textured edge restraints, and their polymeric sand products. If you have the original paperwork, look for the product code printed on the bag or box. No paperwork? A photo of the part next to a tape measure gets us ninety percent of the way there on the first call. We’ve seen plenty of cases in Fort Lauderdale where a homeowner bought a generic edge restraint at a big-box store only to find the Barrette paver’s dimensions are off by a quarter inch, and that quarter inch turns into a wavy border line after the first rain. For most repairs, we install OEM Barrette parts. For edge restraints and jointing sand, a quality aftermarket equivalent like Techniseal or Alliance does the job without voiding anything, since these are wear items, not structural components. Structural pieces stay OEM.
Styles & brands we work with







Signs Your Barrette Driveway & Pavers Is Failing
- Water pooling in the same spot after every rain. This means the base layer under the pavers has settled or washed out. In Fort Lauderdale, our sandy soil and heavy afternoon storms make this the number one failure we see. Pooling water works its way into the joints and erodes the bedding layer fast.
- Edge restraints pulling away from the paver field. Barrette edge restraints fail when the spikes get pushed out by expanding clay soil or when a car’s tire catches the edge at just the wrong angle. You’ll notice a widening gap between the border and the main paver field, and then the border starts to lean outward.
- Cracked pavers near the driveway apron. The apron where your driveway meets the street takes the most load stress, especially in Fort Lauderdale neighborhoods with older oak roots pushing up from underneath. A cracked paver there usually means the base below it has a void, not just a bad paver.
- Jointing sand disappearing continuously. If you’re sweeping sand back into the joints every month, the real issue is drainage. Polymeric sand that keeps washing out means water is moving through the paver bed instead of off the surface, and the base under the pavers is slowly eroding.
- A paver or paver section that rocks underfoot. One wobbly paver is a bedding layer problem. A whole section that moves means the base underneath has failed, which typically requires pulling the pavers, re-compacting the base, and resetting them. You can’t fix that with more sand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Barrette paver repairs run from about $400 for a small patch job of a few pavers up to $2,500 for a full edge restraint replacement and re-leveling of a larger driveway section. If the entire paver driveway installation is the question, that starts at $7,000 and can reach $18,000 depending on square footage, paver grade, and base work. What drives a repair into the higher range is base failure underneath, because that means excavation, new limestone base material, compaction, and resetting the pavers, not just swapping a few pieces. Our written price includes all parts, labor, haul-off of the old material, and a one-year workmanship warranty. The price you approve is the price on the invoice. No change orders because we found something under the pavers; that’s part of the estimate from the start.
DIY or Call Us?
You can safely pull up a rocking paver or two, check what’s underneath, and take photos. That’s a useful check, and it tells us what we’re walking into. What you shouldn’t do is lift a large paver section on a sloped driveway if you’re working alone; a bundle of pavers is heavy enough to throw out a back or crush fingers when a stack shifts. We’ve also seen DIY edge restraint jobs in Fort Lauderdale go sideways when someone spikes the restraint into an irrigation line they didn’t know was six inches under the sod. If the problem is in the base layer or the edge restraint is pulling away on a long run, call (754) 354-7423 and we’ll put eyes on it before you spend a weekend fighting it.
FAQs

Barrette concrete pavers will last 25 to 40 years in this climate, but the base underneath them typically lasts 10 to 15 before needing attention. The paver itself rarely “wears out.” In Fort Lauderdale, what fails first is usually the edge restraint system or the bed of sand under the pavers, not the paver block itself. Our heat, humidity, and afternoon downpours cycle the base more aggressively than you’d see in drier parts of Florida. For exact pricing on a re-level or edge replacement, call (754) 354-7423, and we’ll give you a written estimate before any work starts.
A single cracked paver gets replaced; you can’t effectively repair a structural crack in a concrete paver and have it look or perform the same as the surrounding field. If you don’t have spares from the original install, we’ll match the Barrette color and size from our supplier network. Where repair becomes the better option is when the crack is only in the jointing sand or the edge restraint is loose but not broken. Call (754) 354-7423 with a photo, and we’ll tell you which situation you have.
Most paver repairs in Fort Lauderdale take one day from start to finish, including base compaction and resetting the pavers. If we’re re-doing a long edge restraint run and re-leveling a section, plan on one to two days. The base material needs to be compacted in lifts, and rushing that step is what causes the same failure to come back in a year. Our written estimate will give you the day count before we start.
We stock the most common Barrette edge restraints, paver sizes, and jointing sand on our trucks, because that’s what most Fort Lauderdale driveways need when they fail. Less common paver sizes and specialty border pieces come from our Barrette supplier network, which usually means a two-to-three-day lead time. Either way, the part price is on your estimate before we order it, so you pay exactly what you approved. Call (754) 354-7423 to get a parts and labor quote for your Barrette driveway or paver project.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.


