Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Fort Lauderdale Owner’s Guide
We stock and install Barrette-compatible roofing parts across Fort Lauderdale, with most replacements running $400 – $1,800 installed depending on what failed and how much decking or flashing needs to come with it. Most owners find us because water started staining a ceiling or a few shingles peeled back after one of our summer squalls – and by the time you see that, the failing part has usually been failing quietly for months. If you’re here because your Barrette roof is suddenly demanding attention, here’s what you need to know before you spend a dime.
Which Barrette Models This Applies To
Barrette’s roofing footprint in South Florida runs mostly through their tile and metal profiles – the ones you’ll see on a lot of newer construction in Victoria Park, Rio Vista, and the neighborhoods west of I-95. The compatibility gotcha most homeowners hit is this: Barrette’s barrel tile and their flat tile profiles do not share the same underlayment requirements, and a “matching tile” from a different run will sit a fraction higher at the lap. That fraction is enough to channel water sideways in a hard driving rain. We measure the tile thickness with calipers before ordering anything because Fort Lauderdale humidity swells tile slightly, and a 3/8-inch tile from 2012 is not always the same as a 3/8-inch tile from 2024. For the OEM-vs-aftermarket call: Barrette’s original tile is well-made, but after 8 – 10 years the replacement market has solid equivalents from Eagle and Boral that match the profile within tolerance. We’ll always show you both options with the price difference on the line item, not buried in a footnote.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Ceiling stain that grows after rain, then dries. This usually means the underlayment under the Barrette tile has breached and water is traveling along the truss before it finds a low spot to drip. The tile above can look perfectly fine.
- Pieces of tile in the yard after a wind event. With Barrette’s profile, the most common point of failure is the nail hole, not the tile itself. Wind gets under the lip, works the nail loose over hundreds of cycles, and one strong gust sends it flying.
- Granules collecting in the gutter. If your Barrette install includes their asphalt shingle line, heavy granule loss means the fiberglass mat is exposed, and UV plus Fort Lauderdale salt air will break that shingle down in under two years.
- Rust-colored streaks on metal flashing. On Barrette metal roof systems, the first thing to go is the butyl tape under the flashing at transitions. Rust streaking is usually the screw grommets failing, which lets water wick under the panel.
- Popped tile caps along the ridge. Ridge caps take the most sun and the most wind, and the mortar or adhesive that holds them is not immune to our heat cycling. A loose ridge cap will work its way off eventually – and one missing cap lets water into the whole roof system.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale Barrette work, you’re looking at this range: tile repair runs $600 – $2,500 depending on how many courses are disturbed and whether we’re matching profile or doing a visible-patch; roof repair overall runs $400 – $1,800; a full roof replacement lands between $8,000 – $20,000 for most homes here. What moves the number is decking condition, how much underlayment has to come up, and accessibility – a two-story tile roof off a narrow side lot costs more in labor than a single-story walkable pitch. Every quote we write includes the part number, the material cost, and the labor as separate lines. No change orders because the underlayment was worse than expected – the written price you approve is the price you pay. And that work is covered by our 365-Day Done Right Promise: if the repair doesn’t hold a full year, we’re back at no charge. That’s what the Relay Standard means on a roof.
DIY or Call Us?
Here’s the honest split. You can safely do this: check your gutters for tile pieces or granule accumulation, take photos of anything visible from the ground, and note when the leak appears relative to rainfall. You should not climb a tile roof to swap a piece yourself, even if YouTube makes it look easy. Tile is brittle under your weight, a slipped foot on a wet Fort Lauderdale roof is a broken bone waiting to happen, and walking on one broken spot usually creates three new ones. If your Barrette panel or tile work involves the ridge, the flashing, or any area where you’d need to pull up adjacent pieces to reach the failure, that’s the line we’d tell a friend to call us at. And if you’ve already got water inside, every day of delay is more drywall repair. Call (754) 354-7423 and we’ll get eyes on it fast, with a written quote before any work starts.
FAQs
A Barrette tile roof in Fort Lauderdale should give you 30 – 50 years with good underlayment and intact fasteners, but the underlayment itself usually needs replacement around the 20 – 25 year mark. Our heat, humidity, and hurricane-driven wind load cut the realistic safe window on the fastening system in half compared to what a Barrette roof sees in a dry climate. The tile will outlive the parts holding it. Call (754) 354-7423 and we’ll inspect what’s above and below the tile, not just what’s visible from the curb.
Yes, in most cases a single failed tile, a flashing issue, or a section of damaged underlayment can be repaired without replacing the whole roof. The repair makes sense when the surrounding material is still bond-strong and the decking underneath hasn’t rotted. Once decking is involved, you’re flirting with replacement territory, and we’ll show you the difference on our written quote. Get an exact number for your specific problem at (754) 354-7423.
Most single-tile or small flashing repairs take 2 – 4 hours on site, from setup to final inspection. Larger underlayment sections can run a full day, and a complete re-roof on a typical Fort Lauderdale home is 3 – 5 working days depending on weather. We’ll give you a written window before the job starts, plus live arrival time tracking the morning of the work.
Yes, we keep the most common Barrette-compatible tile profiles and flashing dimensions on our truck and can source the rest within a day or two for Fort Lauderdale jobs. That means the common repair usually happens in a single visit. If the part is unusual, we’ll tell you upfront and give you a lead time we can actually hold.
If your Barrette roof is failing, don’t wait until the next rain finds the inside of your house. Call (754) 354-7423 for a free, written estimate. We’ll tell you exactly what failed, what it costs, and what’s included – before any work starts.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
