Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Fort Lauderdale Owner’s Guide
Boral driveway and paver replacement in Fort Lauderdale typically runs $7,000 to $18,000 installed depending on square footage, paver style, and whether the base needs rebuilding. We stock Boral-compatible pavers for repair jobs and can match existing patterns on most Fort Lauderdale driveways within a week. Most owners discover a problem the same way: a paver sinks after a heavy rain, a crack spiderwebs across the apron, or the sand between stones keeps washing out faster than it used to.
Boral pavers are known for their color retention and dimensional consistency, but South Florida’s heat and rain expose the weak points fast. The two things we see most in Fort Lauderdale are failed base compaction and paver surface spalling, both of which look similar at first but need very different fixes. This page covers what fails, what it costs, and whether you should touch it yourself.
Key Takeaways
- Boral driveway and paver replacement in Fort Lauderdale: $7,000 – $18,000 installed
- Individual paver repair jobs typically run $250 – $700 depending on the area affected
- Most failures trace back to the base layer, not the paver itself
- We are an independent installer and repair provider, not affiliated with Boral
- Free estimate: call (754) 354-7423 and we’ll measure it the same week
Which Boral Models This Applies To
Boral’s concrete pavers fall into a few families you’ve probably walked past without knowing the name: the StoneEdge series (interlocking with a chiseled profile), the SmoothFace series (flatter profile, often used for pool decks and driveways in combination), and the VillaStone plank pavers (longer rectangular format, popular on modern Fort Lauderdale builds). Most driveways we repair here use StoneEdge or SmoothFace in 60mm or 80mm thickness.
The compatibility gotcha worth knowing: Boral’s 60mm pavers are fine for pedestrian traffic but marginal for a driveway that sees daily vehicle weight in South Florida conditions. If the original install used 60mm on a driveway that now shows settlement or edge cracking, the fix usually means going to 80mm, not swapping like-for-like. Check the underside of any loose paver. Boral stamps a batch code that includes the series abbreviation and thickness in millimeters. If you can’t read it, measure the paver’s height: 60mm is about 2-3/8 inches, 80mm is about 3-1/8 inches.
For replacement, OEM Boral pavers are the safest match on color and profile, but for discontinued colors, quality aftermarket equivalents from most Florida hardscape suppliers will sit within tolerances that are hard to spot once the joint sand is in. We’ve matched 10-year-old Boral colors before and the trick is sanding level with the original, not the paver color alone.
Styles & brands we work with
Signs Your Boral Driveway & Pavers Is Failing
- A single paver is lower than the ones around it. Water pools there during afternoon storms. The base under that paver has likely washed out or wasn’t compacted fully at install, which means every rain makes it worse until the edges start to chip from tire impact.
- Joint sand keeps disappearing between stones. You sweep sand back in, two downpours later it’s gone again. That’s a drainage problem, not a sand problem. Water is moving under the pavers and carrying the bedding layer with it, which leads to the next failure.
- Wide cracks running across multiple pavers in a straight or sweeping line. That’s a base settling failure, usually from a soft spot in the subgrade or from tree roots that have found the limestone base. Replacing the cracked pavers alone won’t hold; the base underneath has to be excavated and rebuilt.
- Paver surfaces look flaky or pitted, especially near the driveway apron. Salt exposure from brackish air and the occasional softener discharge can accelerate surface spalling on concrete pavers. It usually shows first where water sits longest, not across the whole driveway evenly.
- Edge pavers are shifting outward along the border. The edge restraint has degraded or was never installed properly. Once the perimeter loosens, the middle follows, and you’ll start seeing gaps open up between rows that weren’t there a year ago.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Boral driveway and paver replacement in Fort Lauderdale runs $7,000 to $18,000 installed, and the spread usually comes down to three things: total square footage, whether the original base can be salvaged, and the paver profile you choose. Salvaging a good limestone base can take thousands off the job; discovering a failed base underneath adds excavation and haul-away you didn’t originally plan for. That’s exactly why our written pricing lays out what we’ll do if the base is sound and what changes if it isn’t, before the first tool comes out.
A typical job includes demolition of the old pavers and base material if needed, regrading for proper slope away from the home, new compacted base, bedding sand, pavers, edge restraints, and joint sand. You’ll get the price in writing first, along with our 365-Day Done Right Promise: if the work doesn’t hold up, we make it right. Any paver repair that fails gets a free second visit, no argument.
DIY or Call Us?
You can safely check a few things yourself: pull up one loose paver and look at what’s under it, measure the thickness with a tape, and note which colors are visibly sun-faded. That’s useful information for us and helps you understand what you’re dealing with. What you should not DIY is rebuilding the base layer, or trying to level a settled section by pulling pavers and adding sand on top. That “fix” looks fine for two months and then the whole area sinks again, usually worse, because the base was never addressed.
Fort Lauderdale’s summer rain cycles will expose a weak repair within a single season. If the base has failed, the fix is excavation, recompaction, and re-installation, and that’s work that needs a plate compactor, a real understanding of drainage slope, and a crew that won’t cut corners on the layer you’ll never see. Call (754) 354-7423 for a free estimate. Luca Romano usually answers the phone himself.
FAQs
With a properly compacted base and regular re-sanding, Boral concrete pavers on a Fort Lauderdale driveway will last 20 to 30 years. The paver itself rarely wears out; the base and drainage system fail first, and that’s what shortens the lifespan. Call (754) 354-7423 for an inspection if your driveway is over 10 years old and you’re noticing settlement.
Yes, most individual paver issues like one cracked stone, a small settled section, or faded edge rows can be repaired without replacing the whole driveway. Repair jobs in Fort Lauderdale typically run $250 to $700 depending on how much base rework is needed. We’ll match the color and profile before we quote, so you know exactly what you’re approving.
Most paver repair jobs take one day for the repair itself plus a follow-up visit for joint sand and final compaction after the area settles. A full driveway replacement in Fort Lauderdale usually runs three to five working days depending on the size and weather. We’ll give you the schedule in writing before we start, so there’s no guessing.
We stock common Boral StoneEdge and SmoothFace profiles in several Fort Lauderdale colors and can source discontinued styles from local suppliers within a few days. For full driveway replacements, we order the exact paver count from Boral-compatible distributors after we measure. You’ll see the material line item on the written quote before anything is ordered.
No. The only time the price moves is if we open up the site and find a base failure or hidden condition that no one could have seen before demolition, and we’ll show you exactly what changed and what it costs before any of that extra work begins. That’s the Relay Visibility Guarantee: a written price, live updates, and a number that doesn’t surprise you at the invoice.
Call (754) 354-7423 to schedule your free estimate. We’ll come out, measure, check the base, and hand you a written price for Boral driveway and paver work in Fort Lauderdale, same visit.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
