A Sawyer company - serving Fort Lauderdale, FL
An open living room and dining area after a whole-home remodel

Boral Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fort Lauderdale
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Boral Roofing: The Fort Lauderdale Owner’s Guide

We stock and install Boral-compatible roofing parts in Fort Lauderdale, with most tile replacements running $600 – $2,500 installed depending on the profile and how many tiles failed. If you’ve got a cracked, slipped, or broken Boral tile after a South Florida storm, we can usually match the profile and get it replaced without tearing up the whole roof. Most homeowners discover the problem the same way: a dark water stain on the ceiling, granules in the gutter after a hard rain, or a neighbor pointing out a tile that’s sitting crooked after a windy afternoon off the Atlantic.

Call (754) 354-7423

Boral tile is concrete, not clay, which means it handles Fort Lauderdale’s humidity and salt air differently than a terracotta roof would. The tiles are heavier, denser, and they’re made to a specific dimensional profile so they lock together. When one tile cracks or shifts, water doesn’t just sit on top: it finds the underlayment, and from there it finds your plywood decking. That’s the point where a $400 tile repair turns into a $1,800 structural fix. We’d rather catch it at the tile stage, every time.

We’re an independent roofing contractor in Fort Lauderdale, not a Boral dealer. But we work with Boral profiles regularly enough to know the compatibility quirks without having to “figure it out” on your roof. If you’re looking for a Boral-specific replacement, call (754) 354-7423 and describe what you’re seeing. We’ll tell you over the phone whether it sounds like a tile issue, a flashing issue, or an underlayment failure, and what a realistic fix costs before anyone climbs a ladder.

Which Boral Models This Applies To

A remodeled living room with built-in shelves around the fireplace

Boral has moved through several product lines over the years, and the name on your paperwork matters less than the physical profile of the tile. The most common Boral profiles we see on Fort Lauderdale roofs are the flat shingle-style tiles, the low-profile barrel (often called Barcelona or mission-lite), and the full S-curve or Roman profile. If you have the original installation paperwork, look for terms like “Boral TileSeal,” “Boral Concrete Roof Tile,” or the newer “Boral Roofing ESS” series. If you don’t have paperwork, flip a broken tile over: Boral stamps a plant code and often a profile number on the underside, and that stamp tells us more than the color does.

Here’s the compatibility gotcha most homeowners don’t know: Boral tile colors and profiles changed subtly between manufacturing years and plants. A “terracotta blend” from a 2012 run won’t match a “terracotta blend” from a 2022 run perfectly. Color matching on a Boral roof in Fort Lauderdale is a blend job, not a grab-and-swap job. We pull tiles from the least visible slope (like the back elevation facing the alley) to use as field replacements, then put an honest-matched new tile or a close aftermarket equivalent in the low-visibility spot. That’s what keeps the street-facing elevation looking right without charging you for a full re-tile.

For the record, “OEM Boral” is the gold standard when we can get it, but Boral’s Florida distribution doesn’t always keep older discontinued profiles in stock. A quality aftermarket concrete tile from Eagle or Westile will often match the profile dimensions and install the same way, and on a roof that’s already 12 years old, the color difference is less visible than you’d think after six months of Florida sun. We’ll show you both options with the price difference in writing before we order anything.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Boral Roofing Is Failing

  • Water stains on ceilings after a rain, but not every rain. This is usually a cracked tile that only leaks when wind drives rain at a specific angle. On Fort Lauderdale homes, that’s most often a tile near a valley, a hip, or a wall flashing where water concentrates. The leak is real, but it’s localized to one or two tiles.
  • Concrete granules collecting in gutters or downspouts. Boral tiles shed fine aggregate as they weather, but heavy granule loss means the tile surface is spalling. Spalled tiles absorb more water, get heavier, and freeze-thaw damage isn’t the issue here: it’s the constant humidity and salt exposure that accelerates surface breakdown within 15 – 20 years.
  • A tile that’s visibly shifted or sitting higher than its neighbors. Concrete tiles rely on interlocking lugs and sometimes mechanical fastening. When a lug shears off or a nail corrodes through, wind gets under the tile and shifts it. In Fort Lauderdale’s storm season, that single shifted tile becomes a domino chain when the next tropical system blows through.
  • Daylight visible from the attic, or a sag in the tile line. Flat Boral profiles especially can telegraph a failing underlayment as a visible dip. If you can see roof structure from inside the attic, the underlayment has already breached and water has been getting to the deck. This is beyond a tile swap, and the sooner we open it up, the less we replace.
  • Cracked or missing hip and ridge tiles at the roof’s edges. These pieces take the most wind load and they’re the first to go on a Boral roof. They’re also the most important for keeping water out of the roof’s most vulnerable joints. Every Fort Lauderdale storm season, we replace hip and ridge units on Boral roofs that lose a few tiles to wind, and the fix is usually one-day if we can match the profile.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A whole-home remodel with the living, dining and kitchen areas opened up

For Boral roof repair in Fort Lauderdale, plan on $600 – $2,500 depending on how many tiles failed, whether we’re matching an active or discontinued profile, and whether the underlayment underneath is still sound. A simple single-tile replacement on a flat Boral shingle profile lands around $400 – $600. A larger repair that involves replacing a section of underlayment, re-bedding hip tiles, or re-flashing a penetration runs $1,200 – $2,500. If we’re talking about a full roof replacement because the Boral tiles have reached end of life, that range is $8,000 – $20,000 in Fort Lauderdale, with the tile profile and roof complexity driving the spread.

Every Boral repair we quote includes the tile, the labor, the mortar or adhesive, any fastener repair, and a written workmanship warranty on the repair itself. We don’t charge a separate “mobilization fee” to come look at your roof, and we don’t do change orders mid-job. The price you approve before we start is the price you pay when we’re done. If we open up the roof and find water damage under the tile, we’ll show you a photo, tell you what it’ll cost to address, and get your sign-off before touching it. No surprises, no “while we were up there” additions.

Luca Romano has been up on enough Fort Lauderdale rooftops to know that a Boral tile that looks fine from the ground can be hiding a rotted batten or a failed underlayment seam underneath. We price for what we can see, and we’re straight with you about what we can’t see until the tile comes off.

DIY or Call Us?

Here’s the honest split. You can safely do a visual check from the ground or a ladder: look for shifted tiles, missing hip caps, and granules in the gutter. You can also check the attic for daylight and water stains after a storm. What you should not do is walk a Boral concrete tile roof to “just take a look.” Concrete tile is not forgiving, and Fort Lauderdale roofs are steep enough that a roofing fall is a serious, permanent-risk event. We wear proper footwear, use roof brackets and fall protection, and we still treat every walk with respect. The risk isn’t worth saving a few hundred dollars.

Where DIY also goes wrong on Boral is the color match. Homeowners buy a close-enough tile from a supply yard, it looks wrong against the field, and now they’ve got a patchwork roof and a $75 tile they can’t return. We blend from less-visible slopes so the repair disappears. If you want to know what you’re dealing with before anyone commits, call (754) 354-7423 and describe the symptom. We’ll tell you our honest read and what it’ll cost to fix, whether or not you hire us.

FAQs

A remodeled family room with new windows and a window seat

Getting started with Sawyer in Fort Lauderdale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Fort Lauderdale team

A local crew that works across Fort Lauderdale and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Fort Lauderdale? Licensed & insured · Free on-site estimates response · free estimates
Call (754) 354-7423
Local Service Coverage

Request a Free Estimate in Fort Lauderdale

Tell us what you need - Sawyer Remodel Fort Lauderdale responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and authorize us to contact you via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch