Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Cambria kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on how much of the kitchen you’re reworking and which Cambria series you choose. We stock Cambria-compatible materials and install them on a schedule that matches your timeline, not ours. Most owners call us when a countertop edge is chipped, a seam has opened, or a sink cutout is delaminating around the rim, and they want to know if the fix means replacing one surface or the whole run.
Here’s the thing about Cambria: it’s quartz, which means it doesn’t need sealing the way granite does, but it’s not indestructible. A dropped cast-iron pan can chip an edge. A cabinet that settles can stress a seam. And in Fort Lauderdale’s humidity, a poor original install shows itself faster than it would in a dry climate. If you’re standing in your kitchen right now staring at a crack, a stain that won’t lift, or a seam that’s catching your fingernail, this page tells you what it’ll take to make it right.
Which Cambria Models This Applies To
Cambria’s lineup runs broad: Brittanicca, Torquay, Portrush, Windermere, Ella, Skara Brae, and the newer matte-finish lines. The compatibility gotcha most homeowners don’t know is that Cambria changed its slab thickness offerings over the years. Today’s standard is 3 cm, but plenty of Fort Lauderdale kitchens built before 2015 are sitting on 2 cm Cambria with a built-up edge. If you’re replacing one counter section and keeping the rest, the thickness has to match exactly or the edge profile won’t line up. We verify that on the first visit before we quote anything.
Identifying your exact series is straightforward: the fabricator usually leaves a small Cambria logo etched near an inside corner, often under the sink lip. If that’s gone, the pattern and background color get us close. For OEM versus aftermarket, there’s no real “aftermarket” for Cambria slabs themselves, since the pattern is proprietary. What we can do is match complementary Cambria series at a different price point if you’re reworking the whole kitchen, or cut and seam a matching series where full-slab replacement isn’t needed. We also work with Silestone, Caesarstone, and other quartz lines, so if a full kitchen remodel is on the table, you’re not locked into one brand’s price sheet.
Styles & brands we work with
Signs Your Cambria Kitchen Remodeling Is Failing
- A seam that’s opened or lifted. This usually means the substrate under the seam flexed, or the original adhesive broke down from moisture exposure. In Fort Lauderdale, we see it most often near dishwashers and sinks, where steam cycles are constant.
- Chipped edges on high-use corners. Quartz is hard but brittle at the edges. A dropped pot or a chair swung into the corner is the usual culprit. The chip rarely gets bigger on its own, but it catches water and grime, and it’s the first thing you see when you walk in.
- Dull or cloudy patches that won’t polish out. Cambria’s resin binder can haze if a cleaner with the wrong pH sat on the surface too long, or if someone used an abrasive pad. It’s a finish issue, not a structural one, but it’s also not reversible with at-home products.
- Stress cracks radiating from a sink or cooktop cutout. This is the one we take most seriously. A crack running from a cutout corner means the slab wasn’t properly supported or the cabinet underneath moved. It needs a pro to assess whether the cabinet needs reinforcement before any new surface goes on.
- The overhang is sagging or flexing. If you can press down on an unsupported overhang and feel give, the bracket layout was inadequate. Over time, that flex can crack the slab outright. This is a fixable problem before it becomes a replacement problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale homeowners, a Cambria-focused kitchen remodel lands between $14,000 and $45,000 depending on scope. A smaller repair or single-slab replacement is less, but if you’re already pulling countertops, most people use the moment to address the cabinets, sink, and backsplash at the same time. Here’s how the component pricing breaks down:
- Countertop installation: $2,000 – $6,500
- Cabinet installation: $4,000 – $13,000
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full kitchen remodel: $14,000 – $45,000
What drives the spread is slab square footage, edge profile complexity, whether the cabinets underneath are staying or going, and how much demo and prep the existing build requires. Every quote includes the slab, fabrication, templating, delivery, and installation labor. There’s no separate charge for “site prep” or “disposal” buried in the fine print. The written price you approve before work starts is the price on the final invoice. We also back the work with the 365-Day Done Right Promise: if the install isn’t right, we make it right, in writing, for a full year.
DIY or Call Us?
Some things you can handle yourself. If a seam has collected grime, clean it with a soft brush and a pH-neutral cleaner, then dry it fully. If a chip is tiny and out of sight, you can live with it. But do not attempt to glue a seam, polish a haze, or “fix” a stress crack yourself. Quartz repair resins are finicky about temperature, the color match has to be exact, and a bad patch looks worse than the original damage. And if the slab is cracked near a sink or cooktop, the problem may be the cabinet structure underneath, not the stone itself. Call us at (754) 354-7423 and we’ll tell you what you’re actually dealing with before anyone picks up a tool.
FAQs
A properly installed Cambria top should last 20 to 30 years, even in South Florida humidity. What shortens that lifespan is cabinet settling, poor seam placement, and standing water at the sink rim. If the original install was done right, the surface itself won’t fail; the substrate around it will. Call (754) 354-7423 if you suspect your cabinets are the real problem.
Yes, chips, seams, and surface haze can usually be repaired if the underlying substrate is sound. Cracks running from cutouts are a different story, since the repair will fail again if the cabinet flexes. We’ll tell you straight which category you’re in. Call (754) 354-7423 for a free assessment.
For a full kitchen remodel with Cambria countertops, expect two to four weeks from demo to final walkthrough. Countertop templating and fabrication alone usually runs seven to ten days after cabinets are set. We give you a written timeline before the job starts and live photo updates along the way.
We work directly with Cambria’s distribution network, so common series are typically available within days. Specialty or newer series can take two to three weeks depending on distribution. We’ll check availability before we quote so you’re not waiting on a slab that’s two states away.
The work either holds up or it doesn’t. We make sure it does. Call (754) 354-7423 to schedule your free estimate, and we’ll walk your kitchen with you, answer every question straight, and hand you a written price before any work begins.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
