Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose ECO Window Systems Construction
We provide independent Eco Window Systems in Fort Lauderdale, from impact retrofit investigations to complete tear-outs on older concrete-block homes. Our crews work on these windows daily, so we know which fasteners, flashings, and gaskets hold up in salt air and which ones fail within two hurricane seasons. We’re not an authorized ECO Window Systems dealer, and we say that plainly: we’re an independent service provider who fixes and installs their product because we respect how it’s built. If you own ECO windows and something’s off, call (754) 354-7423 and we’ll tell you what’s actually wrong.
Fort Lauderdale punishes windows harder than most Florida cities. The salt air off the Atlantic, the humidity that never quits, and wind codes that demand Miami-Dade County product approvals mean a window that works fine in Orlando can fail here in three years. That’s the reality we work in every week, and it shapes how we approach every ECO Window Systems job.
Why Trust Sawyer Remodel Fort Lauderdale for Your ECO Window Systems Construction?
Luca Romano, our owner and lead contractor, grew up pulling framing nail guns apart in East Los Angeles and trained at Los Angeles Trade-Technical College, where he learned to read structural plans as fluently as most people read a menu. He’s been running crews in Fort Lauderdale for several years now, including some tight older builds near Las Olas Boulevard where nothing was square and every window opening fought back, and he’s handled ECO Window Systems Construction in Lauderdale-by-the-Sea, FL projects as well. That kind of work teaches you what a window frame actually does under load, and it’s why we don’t treat ECO Window Systems products like a generic swap-out job.
Our technicians know the difference between an ECO 5500 Series impact casement and a 7000 Series single-hung without checking the sticker, because they’ve rebuilt both. We stock OEM-compatible structural components: balances, sash locks, roller cartridges, the parts that actually determine whether your window closes tight and holds its rating. And every job carries The Relay Visibility Guarantee: a written price before work starts, live arrival time tracking, and before-and-after photo updates. If the repair fails within 365 days, we come back and make it right under our Done Right Promise. No argument, no invoice gymnastics.
Styles & brands we work with
Common ECO Window Systems Construction Problems We Fix in Fort Lauderdale
Here’s what we actually see in the field, week after week. These aren’t hypothetical failure modes from a brochure; they’re what Fort Lauderdale’s salt air and humidity do to these specific window lines.
- 9000 Series Horizontal Roller bind and flatten. Beachside sand grit infiltrates the roller track, and the original nylon wheels disintegrate. The sash starts dragging, then jams half-open. We’ve pulled rollers from condos off Galt Ocean Drive where the wheels were literally gone, leaving metal-on-metal contact. The fix is OEM stainless-caged roller assemblies, not the generic top-hung rollers you find online. Generic rollers shift the sash geometry and the problem returns in a year.
- Removable mullion posts on older ECO 5500 impact casements lose structural bite. The anchor screws corrode in salt air, and the post starts flexing during wind-load testing. That flex is the first sign the window won’t hold its impact rating when a hurricane actually hits. We replace the anchors, re-bed the post, and re-test the assembly. It’s a repair most companies write off as a full replacement, but it’s usually fixable.
- Vinyl sash corners on 7000 Series single-hungs open up under thermal cycling. Fort Lauderdale’s heat expands the vinyl, the humidity swells the frame, and over years the corner welds separate. You’ll feel air moving around the sash even when it’s locked, and a blower door test will read 20+ ACH. We re-weld the corners and replace the weatherstripping with marine-grade material that won’t compress flat in our climate.
- Factory glazing tape on ECO Traditional awnings dries out. The sun and salt air here bake that tape until it cracks, and water wicks into the sill track. Homeowners notice brown stains on the interior sill and assume the window’s shot. Usually it isn’t. We pull the glass, clean the channel, re-glaze with a butyl tape rated for coastal applications, and the staining stops.
- Impact glass delamination on older ECO units near the Intracoastal. Within a mile of the water, we see the inner laminate layer start to cloud after 8-10 years of salt exposure. It doesn’t always mean replacement. We’ll inspect the glass, check the frame reinforcement channel, and give you an honest read on whether you’re looking at a glass pack swap or a full unit replacement.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
We use OEM ECO structural components whenever they’re available: balances, sash locks, roller cartridges, mullion post anchors. These are the parts that determine whether your window holds its wind rating and keeps water out. Generic tilt latches and top-hung rollers change the sash geometry, and that voids the lifespan ECO built into the product. We won’t install parts we know will fail in two hurricane seasons.
We only recommend full replacement when the frame itself has lost structural integrity; specifically, when a salt-corroded frame has eaten through the internal reinforcement channel. That’s the line. A worn gasket, a clouded glass pack, a binding roller: those are repairs. A frame that’s rusted from the inside out: that’s a replacement. We’ll show you photos of what we found, walk you through the cost difference, and let you decide with real numbers in front of you. For a straight answer on your ECO windows, call (754) 354-7423.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place, check the sash geometry, test the operation, and identify the specific failure. For impact units, we look at the mullion anchors and frame reinforcement channel before anything else.
- 2
Repair or install. We use OEM-compatible ECO parts for any structural component. If we’re installing new ECO windows, we flash to Miami-Dade County standards and verify every opening is square before the unit goes in.
- 3
Test. We cycle the window through full operation, check air infiltration, and for impact units, verify the mullion post and sash locks engage without flex. If it doesn’t hold, it doesn’t get called done.
- 4
Warranty. Every job gets our 365-Day Done Right Promise in writing. If the repair fails within a year, we return on a free second visit and make it right. The work either holds up or it doesn’t; we make sure it does.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Fort Lauderdale
We service the ECO 5500 Series Impact Casement, the 7000 Series Single-Hung, the 9000 Series Horizontal Roller, and the ECO Traditional Awning. Our Fort Lauderdale stock includes OEM roller assemblies for the 9000 Series, mullion post anchor kits for the 5500 impact line, corner weld repair materials for the 7000 Series, and coastal-rated glazing tape for the Traditional awnings. If you’re considering new impact windows, we install ECO units as well as other major brands, and we’ll quote you a written price per opening before any work starts.
We Also Service These Brands
While ECO Window Systems is a focus of our work, we’re not tied to one manufacturer. Our crews also work with KraftMaid and Cambria for interior projects, Silestone countertops, and Kohler fixtures. If your remodel spans windows, countertops, and cabinets, our General Contractor services let one team take it all on without you chasing three different contractors.
FAQs – ECO Window Systems Construction Service in Fort Lauderdale
No. We’re an independent ECO Window Systems service provider, not an authorized dealer or warranty station. That independence means we recommend the repair that’s right for your building and budget, not the one a manufacturer program dictates. Our pricing is fixed and written before work starts, regardless of brand.
The roller assemblies fail first. Beachside sand grit works into the track, the nylon wheels grind down, and the sash binds or derails-something we see often on Eco Window Systems repair in Plantation calls too. We replace them with OEM stainless-caged rollers that hold up to salt air far longer than nylon. For an exact diagnosis on your unit, call (754) 354-7423; estimates are free.
In most cases, you can replace just the mullion post. The anchors corrode, the post loses its bite, and the assembly flexes. We replace the anchor screws, re-bed the post, and re-test. Full frame replacement is only necessary when the corrosion has reached the frame’s reinforcement channel. We’ll show you photos either way.
Usually it’s the sash corners. Thermal cycling in Fort Lauderdale opens the vinyl corner welds, and air leaks around the sash even when locked. It can also be the installation flashing, but if the window is original to a 1960s home, we start with the corners. We’ll diagnose it on-site and give you a written repair price before any work begins.
No. Staining on the interior sill is almost always failed factory glazing tape letting water wick into the sill track. We pull the glass, clean the channel, and re-glaze with a butyl tape made for coastal Florida. The staining stops, and the window serves for years more. Full replacement is only warranted if the frame is rotated or the reinforcement channel is compromised.
We check the frame reinforcement channel first. If the channel is intact and the anchors hold, we repair: new glass pack, new hardware, new weatherstripping. If the channel is crushed or rusted through, we replace. In Fort Lauderdale, after a storm, that’s the call that determines whether your window still meets code. Call (754) 354-7423 for a post-storm inspection and a written repair-or-replace recommendation.
Here’s where our pricing lands for Fort Lauderdale jobs:
| Service | Price Range |
|---|---|
| Impact Window Installation (per opening) | $8,000 – $25,000 |
| Window Replacement (per opening) | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Impact installations run higher because they include Miami-Dade approved units and the flashing detail work our building code demands. The written price you approve is the price you pay; no change orders surprise you at the end. For an exact quote on your ECO windows, call (754) 354-7423.
Book Your ECO Window Systems Service in Fort Lauderdale, FL
If your ECO windows are binding, leaking, or flexing in the wind, we’ll give you a straight diagnosis and a written price before any work starts. Call (754) 354-7423 to schedule your free estimate.
Written by Luca Romano, Owner & Lead Contractor at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
