Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose ES Windows Construction
We provide independent Es Windows in Fort Lauderdale construction, repair, and replacement service across the city, from Lauderdale Manors to Las Olas Isles. Our crew works on these aluminum window and door systems every month, which means we know their failure points before we even arrive. We are not affiliated with or authorized by ES Windows, but we know their extrusions, their rollers, their glazing beads, and their weak spots in coastal air better than most.
What makes our ES Windows work different is the diagnosis. Most contractors swap parts and hope. We find out why the part failed and fix that too. If you have an ES Windows product that is sticking, leaking, corroding, or losing its thermal performance, call us at (754) 354-7423 for a straight answer and a written price.
Why Trust Sawyer Remodel Fort Lauderdale for Your ES Windows Construction?
Luca Romano, our owner and lead contractor, trained at Los Angeles Trade-Technical College reading structural plans, and he has spent the past several years running jobs across Fort Lauderdale, including some tight older builds near Las Olas Boulevard where the original window openings were never square, and nearby ES Windows Construction in Lauderdale-by-the-Sea, FL projects as well. That matters with ES Windows because their aluminum frames are precision-extruded. A sloppy rough opening fights the frame, and the frame loses. We correct the opening before we set the window, not after the caulk fails.
Our team has rebuilt Series 200 folding glass wall tracks, replaced Series 7600 impact glazing beads, and re-bedded Series 9500 thermal break frames that had started to separate from UV exposure. We use OEM ES Windows hardware when lead times allow and proven aftermarket stainless or EPDM parts when they do not. Every job runs under The Relay Standard: a written price before work starts, live arrival time tracking, and before-and-after photo updates. The 365-Day Done Right Promise backs the install in writing.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in Fort Lauderdale
- Series 200 Folding Glass Wall: grinding rollers and track deformation. Sand grains from the beach get into the bottom track, embed in the nylon rollers, and chew the aluminum track surface until the panels drag or bind. We machine the track clean, replace the carrier rollers with stainless units rated for 400 lb each, and install new brush seals so the sand stays out.
- Series 7600 Impact Windows: clogged weep holes and sill corrosion. The weep holes that drain rainwater from the track are small, and in Fort Lauderdale’s humidity they clog with salt residue, pollen, and fine silt. Water backs up, sits in the sill, and corrodes the aluminum. We clear and ream the weeps, treat the corrosion, and often enlarge the drain path slightly so it does not happen again.
- Series 9500 Thermal Break: frame separation and loss of energy efficiency. After years of direct Florida sun, the polyamide strip that separates the interior and exterior aluminum can de-bond from the metal. You will feel heat at the frame edge and see condensation inside. If the separation is early, we can re-bed and seal it. If it is advanced, replacement is usually the honest call.
- Glazing gasket shrinkage around fixed lites. The EPDM gasket that seals the glass to the frame shrinks over time in the heat. That opens a path for air and driven rain. We re-glaze the lite with fresh gasket material matched to the original profile, which is usually a same-day repair.
- Single-hung Series 4500 windows that will not stay up. The block-and-tackle balance or the shoe that locks the sash to the jamb wears out. Most of the time both sides are tired, and replacing only one means the sash racks and sticks. We replace them in pairs, and the window holds like new.
ES Windows Parts & Our Repair-vs-Replace Approach
We stock common ES Windows hardware locally, including Es Windows repair in Plantation supplies and Fort Lauderdale parts: stainless carrier rollers for Series 200 doors, multi-point lock bodies, impact glazing beads, EPDM gaskets in multiple profiles, and balance shoes for Series 4500 single-hungs. When the job calls for OEM ES Windows hardware and the lead time is short, we order it. When an older Series 4500 or 7600 needs a faster turnaround, we substitute marine-grade stainless rollers and high-quality EPDM gaskets that hold up in salt air.
We are straightforward about repair versus replace. A window with deep pitting in the aluminum frame or a failed thermal break on the Series 9500 is usually cheaper to replace than to patch. We will say so plainly and give you the numbers both ways. Call (754) 354-7423 for an honest read on your ES Windows product before you spend money on a patch.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the specific ES Windows failure: track wear, thermal break separation, gasket shrinkage, balance failure, or water intrusion. We check the rough opening and the flashing too, because the window is only as good as the wall behind it.
- 2
Repair or install. We replace the failed ES Windows components or set the new unit, adjusting the frame square and sealing per Miami-Dade product approval details. No shortcuts on the nailing fin or the sealant bead.
- 3
Test. We cycle the window or door through its full range, check drainage, and water-test the exterior seals. If it does not hold, we make it right before we leave.
- 4
Warranty. Every job carries the 365-Day Done Right Promise, backed in writing. If something fails within a year, we come back and fix it, no argument.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Fort Lauderdale
We work on the ES Windows Series 7600 Impact-Rated Aluminum Window, the Series 9500 Thermal Break Aluminum Window, the Series 4500 Single-Hung Aluminum Window, and the Series 200 Folding Glass Wall. Our stock includes rollers, lock bodies, glazing beads, and gaskets for these lines, so most repairs do not wait on a factory shipment. We also install new impact-rated ES Windows units as part of full window replacement and storm hardening projects.
We Also Service These Brands
ES Windows is one of several premium brands we work with. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures as part of full remodels. When your window work turns into a bigger project, our General Contractor services let us handle the whole scope.
FAQs – ES Windows Construction Service in Fort Lauderdale
No, we are an independent Fort Lauderdale construction firm with deep hands-on experience installing and repairing ES Windows products. We are not affiliated with or authorized by ES Windows, but we know their failure points and their installation requirements from real jobs across Broward County.
We use OEM ES Windows hardware when lead times allow, especially for multi-point locks, impact glazing beads, and rollers on newer units. On older Series 4500 and 7600 windows, we often substitute proven aftermarket stainless steel rollers and EPDM gaskets for faster turnaround. We will tell you which we are using and why before the work starts. Call (754) 354-7423 to talk through your specific window.
Most roller replacements, gasket swaps, and balance shoe replacements are same-day jobs. Thermal break repair takes longer because the frame has to be stabilized while the bond cures. New impact window installations usually run two to four days depending on the number of openings and how much flashing work the rough opening needs.
We service and install the Series 7600 Impact-Rated Aluminum Window, Series 9500 Thermal Break Aluminum Window, Series 4500 Single-Hung Aluminum Window, and Series 200 Folding Glass Wall. If you have a different ES Windows product, call us at (754) 354-7423 and we will tell you straight whether we are the right crew for it.
Work on older ES Windows units that are already past their factory warranty does not involve a warranty issue. If your windows are still under factory warranty, some aftermarket parts can affect coverage. We will flag that before touching anything and help you decide whether to wait on OEM parts instead.
Prices are below so you can budget before you call. Labor-only impact window installation runs $3,000 to $8,000 per opening, folding glass wall roller replacement runs $400 to $900 per panel, thermal break repair runs $800 to $2,000 per frame, and full window replacement including ES Windows product runs $4,500 to $15,000. Call (754) 354-7423 for an exact written quote on your job.
| ES Windows Service | Fort Lauderdale Price Range |
|---|---|
| Impact window installation (labor-only, per opening) | $3,000 – $8,000 |
| Folding glass wall roller replacement (per panel) | $400 – $900 |
| Thermal break repair (per frame) | $800 – $2,000 |
| Full window replacement including ES Windows product | $4,500 – $15,000 |
Book Your ES Windows Service in Fort Lauderdale, FL
If your ES Windows are sticking, leaking, corroding, or losing their thermal performance, call us at (754) 354-7423. We will give you a written price and a straight answer. No part-swapping, no guessing. The work either holds up or it doesn’t, and we make sure it does.
Written by Luca Romano, Owner and Lead Contractor at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale since 2005.
