Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Fort Lauderdale Owner’s Guide
We stock and install Jerith-compatible driveway and paver systems across Fort Lauderdale, with typical installed replacement work running $7,000 – $18,000 depending on square footage, base condition, and paver type. Most owners discover a problem the hard way: a paver sinks after a heavy rain, a section shifts near the driveway apron, or water pools where it never used to. If your Jerith driveway or paver area is failing, call (754) 354-7423 and we’ll come measure it, price it in writing, and tell you exactly what’s underneath before any work starts.
Which Jerith Models This Applies To
Jerith manufactures aluminum and steel fencing systems, but many Fort Lauderdale homes pair Jerith fence lines with paver driveways, walkways, and patio aprons that carry the same install footprint. The paver portion of the work we handle covers residential interlocking concrete pavers, commonly 60mm and 80mm thickness, installed over compacted base rock and sand. If you’re matching an existing Jerith fence post line to a new paver driveway, the gotcha is post-to-paver clearance: Jerith post flanges sit low, and a poorly planned paver elevation can bury the flange or create a trip edge. We check that before we quote anything.
When it comes to parts, you have two paths: OEM Jerith fence components from the manufacturer, or quality aftermarket equivalents for the paver base, edge restraints, and joint sand. For structural fence parts like hinges, latch posts, and gate frame sections, we recommend OEM Jerith so the fit and finish match what’s already on your property. For pavers themselves, brands like Belgard, Tremron, and Techo-Bloc are proven in South Florida and we work with them regularly. Sawyer Remodel Fort Lauderdale is an independent contractor, not affiliated with Jerith, but we install and service their fence lines alongside driveway and paver work every month.
Styles & brands we work with
Signs Your Jerith Driveway & Pavers Is Failing
- Sinking or dipping pavers near the driveway edge. This almost always points to base rock failure underneath, usually from water washing away the sand and fines over years of South Florida downpours. The paver itself is fine; the foundation under it is gone.
- Paver shifting around Jerith gate posts. Gate posts take lateral force every time the gate swings, and if the paver base wasn’t compacted tightly around the post footing, the pavers start to drift and crack. You’ll see a crescent-shaped gap forming around the post.
- Standing water that lingers 24 hours after rain. Fort Lauderdale’s flat grade and high water table mean drainage planning is everything. If water doesn’t sheet off the driveway, the base is eroding from below and the failure will keep spreading.
- Edge restraints pulling away or curling. When the plastic or aluminum edging starts lifting, the pavers no longer lock together as a unit. Each paver then moves independently, and the joints widen until the whole surface looks like it’s coming apart.
- Weeds or sand washing out between joints. Polymeric sand joints should stay put for years. If you sweep sand out of the joints after every rain, the sand lock has failed and the pavers will begin to shift within a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a full Jerith-compatible paver driveway replacement runs $7,000 – $18,000 installed. The range depends on three things: total square footage, whether we’re reusing the existing base or rebuilding it from scratch, and the paver brand and pattern you choose. A tired 2-car driveway that needs full excavation, new base rock, sand, pavers, edge restraints, and joint sand will land on the higher end. A patio apron that just needs the top layer re-leveled and re-sanded lands on the lower end.
Every quote we write includes the parts, the labor, the haul-off of old material, and the warranty on our work, itemized in writing before you approve anything. That’s the Relay Standard: you know the price before we start, and the number on the invoice matches the number you signed. If a paver fails within 365 days after we install it, we come back and make it right under our 365-Day Done Right Promise. Call (754) 354-7423 and we’ll measure your driveway and give you a written price that same visit.
DIY or Call Us?
You can safely check a few things yourself: walk the driveway after a hard rain and mark where water pools, look for pavers sitting proud or sunken by more than half an inch, and run a hose along the edge to see where water exits. What you shouldn’t do is lift pavers and start digging without knowing what’s underneath. Fort Lauderdale properties built before 2000 often have irrigation lines, landscape lighting wire, or even shallow septic risers running under driveway aprons. Cut one of those and a $500 paver fix becomes a $4,000 repair.
If the damage is localized, we can often repair a section without tearing out the whole driveway. If the base has failed across a wide area, patching just moves the problem around and you’ll be back here in two years. Either way, the fix starts with a phone call to (754) 354-7423 and a free estimate. Luca Romano has seen enough Fort Lauderdale driveways to tell you in the first ten minutes which path you’re on.
FAQs
A correctly installed paver driveway in Fort Lauderdale should last 25 – 30 years, though the joint sand needs re-topping every 4 – 6 years due to the heavy rain cycles and UV exposure. The pavers themselves rarely fail; it’s the base and edge restraint system that determines lifespan. Call (754) 354-7423 and we’ll tell you honestly how many years your current install has left.
Yes, if the base under the sunken area is still structurally sound, we can lift the affected pavers, re-compact the base, add fresh sand, and re-install the same pavers for a fraction of the full replacement cost. The catch is that we won’t know the base condition until we lift the first few pavers. We’ll show you what we find and give you a written price before we go further.
A standard two-car driveway replacement takes 3 – 5 working days from excavation to finished joint sand, weather permitting. We schedule around rain and never leave your driveway torn open overnight without a clear plan for grading and drainage. You’ll get photo updates before and after each day’s work so you can see the progress from your phone.
We stock common Jerith gate hardware, post caps, and hinge sets on our trucks so we can match your existing fence while we’re working on the driveway or paver area. For pavers, we source from Belgard, Tremron, and Techo-Bloc, and we also stock parts for KraftMaid, Cambria, and Silestone on the remodeling side. If we don’t have a specific Jerith part in hand, we can order it and have it on site within days, not weeks.
If your Jerith driveway or paver area is failing, don’t wait for the next heavy rain to make it worse. Call (754) 354-7423 to schedule a free estimate. We’ll come out, measure, inspect the base, and hand you a written price before any work begins. The work either holds up or it doesn’t, we make sure it does.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
