Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The Fort Lauderdale Owner’s Guide
Jerith fence installation in Fort Lauderdale typically runs $3,500 to $9,000 for a full aluminum fence replacement, depending on linear footage, gate count, and whether we’re pulling old posts or setting new ones in concrete. Most owners don’t call us for a whole fence, though. They call because a gate sags, a post leans after a storm, or a latch stopped catching. The good news: we keep common Jerith-compatible hinges, latches, post caps, and gate frame parts on the truck, so a single failed component rarely means a whole new fence.
The scenario usually goes like this. You’ve had a Jerith aluminum fence for years. It looked bulletproof when it went in. Then one afternoon the gate drags across the paver driveway, or a wind gust off the Atlantic bends a section, or the self-closing hinge gives up. You call around and three companies tell you they don’t work on Jerith specifically. Fourth call is us, and we actually know the difference between a Jerith-style residential post and a commercial-grade insert. That’s the page you’re on.
Which Jerith Models This Applies To
Jerith builds aluminum and steel fence systems across three main lines: the Residential line (what 90% of Fort Lauderdale homes have), the Estate line (taller, beefier pickets) and a Commercial line we see around pools, HOAs, and condo walkways. Most of the repair work we do falls on Residential series panels with 3/4-inch or 5/8-inch square pickets and matching two- or three-rail gates. The big compatibility gotcha: Jerith picket spacing and rail channel dimensions changed between older and newer manufacturing runs, so a replacement picket from a big-box store won’t always seat flush in a 2008-era Jerith frame. We measure the rail channel, the picket gauge, and the post inside diameter before ordering anything.
On the OEM-versus-aftermarket question: for load-bearing hardware like gate hinges and latch assemblies, we prefer genuine Jerith-spec parts because the screw patterns and weight ratings match. For non-structural items like post caps and finials, a quality aftermarket piece from a domestic supplier works fine and saves money. We’ll tell you which is which and show you the price difference before we order. Sawyer Remodel Fort Lauderdale is an independent contractor, not a Jerith dealer, so we’re free to pick the part that actually solves your problem at the best price.
Styles & brands we work with
Signs Your Jerith Fence Installation Is Failing
Aluminum fencing doesn’t rot, but Fort Lauderdale salt air, hurricane-force wind days, and sandy soil have a way of finding weaknesses in any installation. You’ll usually see one of these before the fence actually fails:
- Gate sagging or dragging on the driveway. Hinge screws strip out of the post over time, especially with a heavy gate. The fix is usually a larger-diameter hinge, a tension-adjustable hinge kit, or an added support diagonal.
- Post lean after a storm. In sandy Fort Lauderdale soil, even a properly set post can shift. If it’s a corner or gate post, leaning means the concrete collar cracked or the post base was under-filled. Repacking and re-setting with a deeper footing usually corrects it.
- Latch not catching or sticking. Salt corrosion on the internal spring and strike plate is a near-certainty within five to seven years near the Intracoastal. A replacement latch assembly runs under $100 in parts and takes us about 20 minutes with the right tooling.
- Loose pickets rattling in the rail. The internal friction clips or screws that hold Jerith pickets in place can loosen from repeated wind gusting. If you wait, the picket drops out and pets or kids find the gap.
- Missing or cracked post caps. Water gets in, sits in the post, and accelerates internal corrosion. It’s a $15 part that prevents a real problem, so we treat it as an urgent quick fix when we see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith fence installation in Fort Lauderdale lands between $3,500 and $9,000 installed. A smaller gate-only repair with hardware swap typically costs $400 to $1,800 depending on gate width and whether we’re drilling new hinge mounts or reinforcing the post. What drives the spread on a full job is linear footage, how many gates you have, whether old posts can be reused, and whether we’re coring through a paver driveway or setting posts in open soil. If your existing fence is Jerith aluminum and the posts are still solid, a panel-for-panel replacement with new gates can hit the lower end of that range. If the yard needs a total re-pull with new footings and a double gate, you’re on the higher end.
Every quote from us includes the written price before any work starts, line-item parts and labor, and the 365-Day Done Right Promise. If a hinge we installed fails or a post shifts because our footing wasn’t right, we come back and make it right. No charge. That’s in writing. The Relay Visibility Guarantee means you’ll know who’s coming, when they’re rolling up, and what the invoice says before a single post hole is dug.
DIY or Call Us?
Some Jerith fence fixes are genuinely easy. If a post cap is missing, a picket is loose, or a hinge screw needs a fresh anchor, a careful owner can handle it with a cordless drill, a level, and a half hour of daylight. Swapping a latch is a 20-minute job if you have the right replacement and know your gate’s exact screw spread. By all means, save the money.
The point where we tell you to stop is gate spring tension. Jerith self-closing hinges hold significant tension, and the wrong tool or a slipped hand releases that force fast. We’ve seen split knuckles and broken fingers from people who thought a spring hinge was a beginner job. If the gate is heavy, the post leans, or the spring under the hinge looks anything but ordinary, call us at (754) 354-7423. Luca Romano usually answers the phone himself, and he’ll tell you straight whether it’s a repair or a replacement before he ever sends a truck.
FAQs
A properly installed Jerith aluminum fence lasts 20 to 30 years in Fort Lauderdale, but the hardware, meaning hinges, latches and post caps, usually needs refreshment around the 6 to 10 year mark due to salt exposure and UV breakdown of internal components. The aluminum itself holds up. It’s the moving parts that wear first. If your fence is 10 plus years old and a hinge fails, don’t assume the fence is dying call (754) 354-7423 and we’ll tell you whether a hardware swap gets you another decade.
A bent gate can often be repaired if the damage is limited to the aluminum frame, because we can straighten it with a jig and reinforce the corner welds. If the pickets themselves are kinked or the rail channel is crushed, replacement is cheaper and looks cleaner. We’ll show you the side-by-side math before you commit. Call us for a free estimate and we’ll price both options.
Most residential Jerith fence installations we do take two to three days from first post hole to final gate adjustment, assuming the weather cooperates and we’re not pulling 80 feet of masonry core-drilling through a driveway. A single gate hardware swap is same-day in most cases. We’ll give you a firm timeline in the written estimate, not a vague range.
We keep common Jerith-compatible latches, hinges, post caps and gate handle kits on the truck, so a basic hardware failure is often fixed the same visit. Specialty items like custom-length pickets or estate-line gate frames come from our suppliers in two to four business days. If you’re not sure what you need, text us a photo of the failed part and we’ll identify it before we arrive.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
