Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Fort Lauderdale Owner’s Guide
We replace and service KraftMaid windows and doors across Fort Lauderdale, and most replacement work runs between $4,500 and $25,000 installed depending on the product line, size, and whether we’re swapping hardware, glass, or the full unit. If your KraftMaid window won’t seal, your sliding door sticks, or the locking hardware has given out, we can usually identify the part, match it, and get it ordered on the first visit. In a lot of Fort Lauderdale homes, the failure isn’t the frame itself. It’s the rollers, the balance springs, the weatherstripping, or the latch, and those can be replaced without tearing out the whole opening.
The typical story we hear: a homeowner opens a KraftMaid sliding door one morning and the panel scrapes against the track. Or a double-hung window drops when they let go of the sash. Or, most common near the coast, the hardware has corroded from salt air and the lock won’t turn without real force. The first thing to know is that you don’t necessarily need new windows or doors. The second thing: matching the part correctly matters more than replacing it quickly.
Which KraftMaid Models This Applies To
KraftMaid is primarily known for cabinetry, which means most “KraftMaid window and door” hardware we see in Fort Lauderdale homes comes from cabinetry-adjacent manufactured openings, built-in millwork, or full-home packages where the homeowner ordered from a KraftMaid line that included doors and windows as part of a broader renovation. That matters because the parts on these units are not universal. A roller assembly from a KraftMaid sliding door in a 2015 build off Las Olas won’t necessarily fit the same-looking door from a 2019 Victoria Park renovation.
Here’s what we check before ordering: the manufacturer sticker, usually on the top or bottom rail of the sash, or on the edge of the door panel. It will have a series code, a date stamp, and sometimes a plant code. We also measure the cutout, the wheel diameter, the bracket spacing, and the channel width. For OEM versus aftermarket: KraftMaid-branded hardware tends to cost more and ship slower. A quality aftermarket equivalent often matches the original spec, sometimes lasts longer, and is in our local supply channel within a few days. The honest answer is case by case. We’ll tell you if the OEM part is worth the wait or if the aftermarket is functionally identical. Sawyer Remodel Fort Lauderdale is an independent service provider, not affiliated with KraftMaid, so we’re not tied to one supply line.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- The door panel drops when you lift the handle. The roller assembly has worn down or cracked. In Fort Lauderdale’s humidity, the nylon wheels on older KraftMaid units can degrade faster than the track itself. You’ll feel resistance, then a sag.
- The window sash won’t stay open. That’s almost always a failed balance spring or block-and-tackle assembly inside the side channel. Salt air accelerates corrosion on the metal coil, especially in homes east of US-1.
- The lock or latch takes real effort to engage. Over time, misalignment from slight frame movement or corroded strike plates turns a one-hand latch into a two-hand fight. If you’re forcing it, you’re damaging it further.
- You can feel air or see daylight around the weatherstripping. The gaskets on KraftMaid doors and windows compress over years of use, and once they flatten, you lose the seal. The fix is straightforward on most models; the part is cheap, the labor is quick.
- The track or the jamb is scored or bent. This is the “fix it now” signal. A broken roller or a dropped panel can chew up the aluminum or vinyl track underneath, and once that track is damaged, the repair stops being a $200 part swap and becomes a much larger job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale homeowners, here’s what we quote for KraftMaid window and door work. A straightforward hardware replacement, like rollers and weatherstripping on a sliding door, typically runs $400 to $1,800 installed. A full window replacement falls between $4,500 and $15,000 depending on how many openings and the glass package, and impact-rated replacements run $8,000 to $25,000. Every quote includes parts, labor, haul-away, and the written warranty on our work, and it’s priced before we start.
What moves the number: impact rating, size of the opening, custom finishes, and whether we’re repairing the existing frame or pulling the whole unit. In a lot of cases, a $350 roller replacement buys you years more out of a door that a less honest contractor would quote as a $3,000 full swap. Luca Romano won’t sell you a replacement you don’t need, because the work either holds up or it doesn’t, and we make sure it does.
DIY or Call Us?
If the issue is a loose handle screw, a dirty track, or visible debris in the bottom channel, clean it, tighten it, and see if the problem disappears. That’s maintenance, not repair. But if a sash is dropping, a door is off its rollers, or a lock is seized, this is not a job to improvise. A sliding glass door panel can weigh 100 pounds or more. A double-hung window under tension from a failed balance can snap when you try to force it. We’ve seen homeowners in Fort Lauderdale turn a $40 roller replacement into a shattered door panel because the old one let go at the wrong time.
We stock the most common KraftMaid-compatible rollers, balances, weatherstripping, and latches on our trucks, and if we don’t have your exact part, we’ll get a written quote for the order before you spend a dollar. Call (754) 354-7423 and we’ll tell you over the phone whether it sounds like a part we carry.
FAQs
In Fort Lauderdale’s salt air and humidity, expect 10 to 20 years from the hardware before rollers, balances, or gaskets need work, with coastal homes on the shorter end of that range. Call us for an inspection if yours are older and starting to stick or sag.
Yes, most of the time. Rollers, balances, weatherstripping, and latches are replaceable parts, and repairing them usually costs far less than a full unit replacement. Call (754) 354-7423 and describe what’s failing, and we’ll tell you if it’s a repair.
Most single-door or single-window hardware repairs take an hour or less on-site, assuming we have the part on the truck that day. If we need to order, we’ll tell you the lead time before any work is scheduled.
We stock the most common KraftMaid-compatible hardware, including rollers, balances, latches, and weatherstripping, on our Fort Lauderdale service trucks. We also work with parts suppliers for Cambria, Silestone, and Kohler, so we’re used to matching exact product lines.
Reach Sawyer Remodel Fort Lauderdale at (754) 354-7423 for a free estimate on your KraftMaid window or door repair. We’ll give you a written price before any work starts, tell you who’s coming and when, and show you photo updates after the job. Then you pay from a link when it’s done right.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
