Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Fort Lauderdale Owner’s Guide
PGT windows and doors in Fort Lauderdale typically cost $8,000 to $25,000 for full impact-rated replacement, while a single failed part like a roller, lock, or weather seal usually runs $75 to $400 installed. We stock the most common PGT parts on our trucks and can match most models within a day or two of confirming the part number. Where most owners find us is at the worst moment: a hurricane season that’s heating up, and the slider that won’t lock, or a window that won’t seal, or a door that suddenly drags. If that’s you, we can get it sorted without replacing the whole unit.
Which PGT Models This Applies To
PGT makes several distinct lines, and parts don’t always cross between them the way you’d expect. The big three we see across Fort Lauderdale are the WinGuard aluminum and vinyl impact lines, the Premier Vinyl line, and the older SpectraGuard series. The fastest way to identify your window or door is the label etched into the glass corner or stamped on the frame edge. It’ll list the model, the glass type, and the impact rating (usually Miami-Dade or Florida Product Approval). Take a photo of that label before you call anyone. It saves a full day.
A compatibility gotcha worth knowing: PGT changed their roller and lock hardware between WinGuard generations, and an early-2000s slider will not accept the current roller assembly without a track adapter. That’s a $40 part we keep on hand. OEM is always our first recommendation for impact-rated units in Fort Lauderdale because the original parts were tested as a system. For non-impact windows and older doors, a quality aftermarket roller or weather seal often performs equivalently at half the cost. We’ll tell you which is which before you spend a dollar.
Styles & brands we work with
Signs Your PGT Windows & Doors Is Failing
- The slider drags or grinds when you open it. Rollers flatten over time, especially in coastal air, and the door starts riding on the track instead of the wheels. Leave it too long and the track itself gets gouged, which turns a $30 roller swap into a $400 track replacement.
- The sash won’t stay up or the window is hard to close. On PGT single-hung and double-hung units, the block-and-tackle balance or spiral balance wears out. It’s a spring-loaded piece inside the jamb, and when it fails, the window becomes a two-handed job.
- The lock doesn’t catch or the door won’t seal tight. Salt air eats the strike plates and keeps the pawl from seating. On impact doors, a misaligned lock isn’t just annoying – it means the door isn’t doing the job you paid for during a storm event.
- Condensation between the panes. This means the sealed unit has failed. On PGT impact windows, the glass is still laminated and doing its safety job, but the insulating gas is gone and the view turns foggy. It’s a glass replacement, not a full window replacement.
- The weather stripping is crumbling or peeling. Florida UV and humidity turn vinyl weather seals brittle within five to seven years. Once it’s gone, you get air leaks, higher electric bills, and water intrusion at the sill during afternoon downpours.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a complete PGT impact window replacement runs $8,000 to $25,000 depending on the number of openings and the glass package. Replacing a single window unit falls in the $4,500 to $15,000 range. But when it’s a part issue rather than a full unit failure, the numbers are far smaller. PGT window repair work – rollers, balances, locks, weather stripping, track realignment – typically falls between $75 and $400 per opening. What drives the range is whether we’re swapping a hardware piece versus taking the sash out and rebalancing it. Every quote includes the part, the labor, haul-away of the old piece, and our written price before we touch anything. We don’t show up with a mystery invoice.
DIY or Call Us?
You can safely check a few things. Look at the label I mentioned earlier. Photograph it. Check whether the screws on the lock plate are loose. Check whether the track has visible debris. Those three observations will cut your phone call in half. What you should not do is pull a PGT sash out of its frame and start poking at the balance mechanism. Those are tensioned components, and when a balance lets go inside the jamb, it can take a finger with it. PGT impact frames are heavy; a slider door panel can weigh 150 pounds. If a part has failed, the frame has usually shifted slightly, and forcing it causes more damage. Call us at (754) 354-7423 and describe what’s happening. We’ll tell you honestly if it’s a $75 fix or something that needs a bigger conversation.
FAQs
How long do PGT windows and doors last in Florida?
PGT impact units typically last 20 to 30 years in Fort Lauderdale’s salt air and UV, though hardware like rollers and weather seals generally needs replacing every 5 to 10 years. The glass itself is warranted for years, but it’s the moving parts that wear first. Call (754) 354-7423 for an exact assessment of your unit’s condition.
Can a failed PGT window or door be repaired instead of replaced?
Yes, most failures can be repaired – rollers, balances, locks, seals, and track issues are all fixable without replacing the full unit. You only need a replacement when the frame is structurally compromised or the glass laminate itself is damaged. We’ll give you the repair cost before you commit to anything.
How long does a PGT part replacement take?
Most hardware swaps – rollers, locks, weather stripping – take 30 to 60 minutes per opening once the part is confirmed. If we have the part on the truck, some jobs are done in a single visit. If we need to order an OEM piece, it’s usually two to three business days in Fort Lauderdale.
Do you stock PGT parts on the truck?
We keep the most common PGT rollers, lock assemblies, balances, and weather seals in our vehicles, and we source OEM components from local Fort Lauderdale suppliers for anything we don’t carry. We also work with parts for KraftMaid, Cambria, and Silestone lines when a remodel crosses over into cabinetry or counters. Call (754) 354-7423 with your model number and we’ll confirm stock before scheduling.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
