Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Roofing: The Fort Lauderdale Owner’s Guide
Tamko roof replacement in Fort Lauderdale typically runs $8,000 to $20,000 installed, and we keep Tamko-compatible materials stocked locally so we can start your repair fast, often within the same week you call. Most owners discover a problem the hard way: a water stain on the ceiling after a heavy afternoon storm, granules collecting in the gutter, or a shingle that lifted during a tropical system and never quite sat back down. You’re not just looking for a part; you’re looking for someone who knows exactly how Tamko products behave in South Florida heat, humidity, and wind, and can match what’s on your roof without guesswork.
A quick note up front: Sawyer Remodel Fort Lauderdale is an independent contractor, not a Tamko dealer or manufacturer affiliate. We install and repair Tamko roofing because it’s a solid product line, but we’re not beholden to any one brand. That matters when you need honest advice about whether to patch, replace a section, or re-roof. You get a straight answer, not a brand pitch.
Key Takeaways:
- Tamko roof repair in Fort Lauderdale typically costs $400 to $1,800 for isolated damage; full replacement runs $8,000 to $20,000 depending on size and tear-off needs.
- We stock common Tamko shingle profiles, underlayment, and flashing locally, so we’re not waiting on a distributor to start your repair.
- Every repair or replacement includes a written price before work starts and a written guarantee when the job is done, under our 365-Day Done Right Promise.
Which Tamko Models This Applies To
Tamko’s residential shingle lineup splits into a few main families, and the part you need depends on which one is on your roof. The most common in Fort Lauderdale is Heritage, Tamko’s laminated architectural shingle series. Heritage comes in multiple weights: Heritage Vintage (their heaviest at roughly 350 pounds per square), Heritage Woodgate, Heritage Premium, and the standard Heritage line. You’ll also see Tamko’s StormShield series on newer builds, which is a peel-and-stick underlayment designed for coastal wind-driven rain, and Elite Glass-Seal, a three-tab option that’s less common on newer roofs but still out there on homes built in the 1990s and early 2000s.
Here’s the compatibility gotcha most people don’t know: Tamko Heritage shingles from different production years can have slight color-lot variations, especially in the warmer red and brown tones that are popular in Florida. If you’re patching a section, the new shingles may not match the roof you have, even if you order the “same” color name. That’s not a defect; it’s how asphalt shingle manufacturing works. We always tell homeowners this before scheduling a patch job, because sometimes a full section replacement in a coordinating color is the better-looking option.
Identifying your exact Tamko product is usually straightforward if you kept the shingle wrapper from the original install, but most people don’t. The alternative: check the edge of a shingle for a printed code on the underside mat, or snap a clear photo of the shingle’s profile (the shadow line and tab shape) and send it to us. We can usually identify the series from a photo alone. For underlayment like StormShield, the product name is printed right on the roll face, so a picture of any exposed area in the attic or at an eave tells us what’s up there.
When it comes to OEM versus aftermarket, here’s the honest version: Tamko makes its own shingles, so there’s no true “generic” Tamko shingle. What you’ll find in the aftermarket are compatible accessories: fasteners, ridge caps, pipe flashings, and drip edge. For those items, quality-brand aftermarket parts (GAF, Owens Corning, or standard mill-finish flashing stock) work fine and sometimes cost less than Tamko-branded equivalents. But for the shingles themselves, you want actual Tamko product to maintain the wind warranty and color consistency. We won’t sell you a “just as good” off-brand shingle and call it a Tamko repair.
Styles & brands we work with
Signs Your Tamko Roofing Is Failing
- Granules in the gutter or at downspout elbows: Asphalt shingles shed granules as they age, but a heavy, sudden accumulation means the UV-stabilized surface layer is breaking down faster than normal. In Fort Lauderdale, that’s usually sun and salt-air damage accelerating what would be a 20-year shingle into a 12-year one.
- Curling or cupping at the shingle edges: This happens when the shingle mat absorbs moisture and expands unevenly. It’s typically a ventilation issue in the attic, or an older roof that’s simply reached the end of its service life. Once edges curl, wind gets under them, and one good afternoon storm can peel a whole section.
- Lifted shingles after a storm, especially near the eaves and rake edges: The adhesive strip on a shingle loses grip as it ages, and Florida’s temperature swings soften and re-harden it repeatedly. When a shingle won’t lie flat anymore, the roof’s wind rating is compromised, which matters a lot in a hurricane zone.
- Water stains on the ceiling or wall, usually appearing after heavy rain: This is the symptom that sends most people looking for help. By the time water stains show indoors, the leak has been working through the underlayment for a while, typically at a flashing point: a pipe boot, chimney, skylight, or valley.
- Dark streaks or moss-like growth on the shingle face: In Florida’s humidity, algae (specifically Gloeocapsa magma) thrives on limestone-filled asphalt shingles. Tamko’s Heritage line includes algae-resistant granules on some models, but not all. The streaking itself isn’t a roof failure, but it tells you the surface is holding moisture, and moisture shortens shingle life.
Replacement Cost & What’s Included
For isolated damage like a torn shingle, a failed pipe boot, or a small flashing repair, Fort Lauderdale homeowners should expect to pay $400 to $1,800, depending on how much material we’re matching and how difficult the access is. A full Tamko roof replacement in Fort Lauderdale lands between $8,000 and $20,000, which covers tear-off of the existing roof, inspection and replacement of any rotted decking, new underlayment, new drip edge, installation, and haul-away of the old material.
What drives the range? Square footage is the biggest factor, followed by roof pitch (a steep hip roof costs more in labor than a low-slope ranch), number of penetrations like vents and skylights, and whether the existing decking passes inspection once the old shingles come off. On older Fort Lauderdale homes, we regularly find decking that looked fine from the top side but has soft spots from years of small leaks. We show you the damaged decking before we touch it, and the price for replacement decking is written down before we start, not sprung on you mid-job.
Every Tamko repair or replacement from Sawyer Remodel Fort Lauderdale includes our 365-Day Done Right Promise: if something we installed doesn’t hold up within a year, we return and make it right at no charge. No argument, no re-quote, no phone tag. The price you approve before we start is the price you pay when the job is done. That’s The Relay Standard, and it applies to a $600 flashing repair the same way it applies to a $20,000 re-roof.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Roof work in Fort Lauderdale isn’t like patching drywall. The roof is a system: shingles, underlayment, flashing, and ventilation all work together, and if you replace one piece incorrectly, you’ve created a leak that will quietly rot decking for months before you see it inside. A roofer’s place is on the ladder, not the homeowner’s. We say that plainly because we’ve repaired enough DIY “fixes” to know that a $40 tube of roofing cement and a YouTube tutorial usually cost more in the long run than calling someone who does this daily.
What you can safely do: photograph the damage from the ground, clear your gutters so water isn’t backing up, and check your attic for daylight or water staining around penetrations. That information helps us quote the job accurately before we even arrive. What you shouldn’t do: walk a wet or steep roof, pry up shingles to “see what’s underneath,” or apply sealant to a leaking pipe boot as a permanent fix. Sealant is a temporary bandage, and on a Fort Lauderdale roof in August, temporary usually means “until the next afternoon storm.”
If you’re not sure whether what you’re looking at is a simple repair or the start of something bigger, call (754) 354-7423. We’ll talk you through what you’re seeing, and if it needs a hands-on look, we’ll schedule a free estimate with a written price before any work begins.
FAQs
Realistically, a Tamko Heritage architectural shingle in South Florida should last 15 to 20 years, not the 30-year marketing number you’ll see on the wrapper. Our sun, heat, humidity, and salt air compress the lifespan of every asphalt shingle brand, Tamko included. If your roof is approaching 15 years and you’re seeing granule loss or curling, start budgeting for replacement rather than repeated repairs.
Isolated damage, like a torn shingle or failed flashing, is repairable for $400 to $1,800 and can extend the life of the surrounding roof meaningfully. The honest line is this: if you’re repairing more than two or three areas a year, or the shingles are already brittle and losing granules, you’re putting money into a roof that’s telling you it’s done. Call (754) 354-7423 and we’ll give you a straight assessment, not a sales pitch.
A repair like a flashing replacement or shingle patch typically takes one visit, usually two to four hours on-site. A full re-roof of a typical Fort Lauderdale home takes two to five days depending on size, pitch, and what we find under the old shingles. We give you a written timeline before we start, and our crew shows up when we say they will, which is part of The Relay Visibility Guarantee.
We stock the Tamko accessories and underlayment we use most often in Fort Lauderdale, so common repairs don’t wait on a distributor. For full shingle replacements, we pull from local supply houses that carry Tamko in volume, which means we can usually have your exact color and series on-site within a day or two. If you’ve got an older or unusual color, we’ll tell you that upfront before ordering anything. Call (754) 354-7423 for a free estimate and we’ll check stock for your specific roof while you’re on the phone.
Get Your Tamko Roof Fixed Right
Roof problems in Fort Lauderdale don’t wait, and neither should you. Whether you’ve got a small leak near a pipe boot or a whole roof that’s past its useful life, call (754) 354-7423 to schedule your free estimate. You’ll get a written price before work starts, a schedule we stick to, and a roof repair that holds up to the next storm season. The work either holds up or it doesn’t; we make sure it does.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
