Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Fort Lauderdale Owner’s Guide
A full Therma-Tru bathroom remodel in Fort Lauderdale typically runs $9,000 to $28,000 installed, and most jobs wrap in two to four weeks depending on layout changes and what’s hiding behind the walls. We stock and install Therma-Tru shower kits, surrounds, and door systems, which means you’re not waiting on a special-order part to arrive before demo starts. Most owners call us after a shower door seal fails, a surround panel cracks at a corner, or water starts staining the drywall below a Therma-Tru threshold.
Here’s the reality of Fort Lauderdale specifically: humidity sits above 70% most of the year, and salt air works on metal hinges and door frames faster than anywhere inland. Therma-Tru makes a solid product, but the Florida climate finds the weak points in any bathroom component. That’s why we keep the most common failure parts on hand and know exactly which Therma-Tru generations they fit.
Key Takeaways
- Installed Therma-Tru bathroom remodeling in Fort Lauderdale: $9,000 – $28,000
- We match OEM and quality aftermarket parts to your specific Therma-Tru model
- Most failures show up as door seal leaks, cracked surrounds, or failing thresholds
- Written price before work starts, backed by the 365-Day Done Right Promise
- Free estimate: call (754) 354-7423
Which Therma-Tru Models This Applies To
Therma-Tru builds bathroom products across two main lines that we see regularly in Fort Lauderdale homes: the Shower Enclosure Series (framed, semi-frameless, and frameless glass door systems) and the Surround Series (multi-piece wall panels that install over existing substrate). Within each line, there are three generations of hardware kits, and here’s the gotcha: hinge mounting plates and roller assemblies are NOT interchangeable across generations, even when the glass dimensions match. A gen-one pivot hinge will not seat on a gen-three jamb profile, period.
To identify your part, start with the label etched into the glass corner or the aluminum edge of your surround panel. It will show a model code like “TS-4200” or “SS-3800.” If the label is worn off, measure the door width and the distance between hinge mounting holes in millimeters. That hole-spacing measurement is the fastest way to confirm which hardware kit your door needs. For OEM versus aftermarket: OEM Therma-Tru seals and sweeps are worth the extra cost because the durometer (rubber hardness) is matched to their glass thickness. Aftermarket aluminum extrusions are usually fine. Aftermarket rubber seals are where we see failures within six months.
Styles & brands we work with
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- Water staining on drywall below the shower door threshold. In Fort Lauderdale, this almost always means the threshold seal has lost compression from age and humidity cycling. The vinyl sweep shrinks, water wicks under the threshold, and the damage starts before you see it. The fix: replace the sweep and re-seal the threshold channel.
- The door hangs slightly out of square or scrapes at the bottom corner. This points to worn hinge bushings or a shifted jamb. Salt air accelerates bushing wear in coastal Fort Lauderdale homes, and a door that scrapes will eventually crack the glass at a stress point. The fix: replace the hinge assembly and re-set the jamb.
- Fog or moisture between double-pane glass panels on a Therma-Tru unit. Once the interior desiccant strip saturates, the seal is done. There is no field repair for a failed insulated glass unit. The fix: order the replacement IGU matched to your model code.
- Cracked surround panel at an inside corner or around a plumbing escutcheon. Therma-Tru surround panels are fiberglass-reinforced, but over-tightening during the original install or repeated thermal expansion from hot Fort Lauderdale showers creates stress fractures. The fix: panel replacement, not patching – patch kits fail within a year.
- Mold or mildew growing inside the door track channel even after cleaning. The weep holes built into the track are clogged or the track itself has corroded from salt and mineral buildup. Water sits instead of draining. The fix: deep-clean the weeps first; if the track is pitted or the weeps are deformed, replace the track assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the Fort Lauderdale pricing breakdown, installed, with no surprises at the invoice:
- Therma-Tru shower door seal or sweep replacement: $90 – $220
- Hinge assembly or roller kit replacement: $180 – $450
- Single surround panel replacement: $600 – $1,400
- Full surround system replacement: $3,500 – $7,000
- Complete Therma-Tru bathroom remodel (shower, surround, door, plumbing trim-out): $9,000 – $28,000
What drives the range: glass panel count, whether the shower base is being replaced or preserved, and what we find once the old surround comes off. Fort Lauderdale homes built before the 2000s often have water-damaged studs behind old surrounds, and that’s the variable nobody can price until demo day. We write the price before work starts, and if we find rot, we show you photos and give you the corrected number before proceeding. Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. In writing.
DIY or Call Us?
Some things are safe to do yourself. Replacing a vinyl door sweep is a ten-minute job with a screwdriver and a utility knife. Cleaning weep holes with a pipe cleaner is fine. Checking for loose hinge screws and tightening them by hand is fine.
That’s where the safe list ends. Full surround panels are tensioned, shimmed, and bonded at specific points, and the glass doors are tempered, which means a single wrong tap at an edge shatters the entire panel. Tempered glass under tension is not forgiving. If your Therma-Tru unit has a cracked panel, a sagging door, or a failed IGU, call (754) 354-7423 and we’ll come out, confirm the model, and give you a written price before we touch anything. Luca Romano has seen enough botched DIY shower door installs in Fort Lauderdale to tell you plainly: don’t test tempered glass.
FAQs
In Fort Lauderdale’s humidity and salt air, you can expect 8 to 15 years from the surround panels and door hardware before something fails. Door seals and sweeps typically last 3 to 5 years. Homes near the Intracoastal or within two miles of the beach land on the lower end of every range. Call (754) 354-7423 for a condition assessment and an exact quote on whatever is wearing out.
No. Fiberglass patch kits fail within a year in a Fort Lauderdale bathroom because the thermal expansion rate of the patch never matches the surrounding panel. Once a crack forms, the right fix is replacing the panel with a factory-matched Therma-Tru unit. We can order the panel and give you a written price before we start.
A door hardware or seal swap takes under two hours. A single surround panel takes half a day. A full surround and door replacement takes one to two days, and a complete bathroom remodel takes two to four weeks. We’ll confirm the timeline in your written estimate before any work starts.
We stock the most common Therma-Tru seals, sweeps, hinge assemblies, and roller kits on our trucks in Fort Lauderdale. Surround panels and replacement glass units are ordered by model code and arrive in five to ten business days. We also stock compatible hardware for KraftMaid, Cambria, and Silestone products.
If your Therma-Tru bathroom is showing any of the signs above, or you want a straight price without the runaround, call (754) 354-7423. We’ll answer the phone, schedule the visit, and put the number in writing before we pick up a tool. The work either holds up or it doesn’t – we make sure it does.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Fort Lauderdale at Sawyer Remodel Fort Lauderdale, serving Fort Lauderdale and nearby areas.
